sprayed99 Posted April 29, 2012 Report Share Posted April 29, 2012 I bought this truck back in 4-16-07 as a totally untouched factory LS S-10 with 46K on it that was owned by an older man. The truck was in great shape and I paid 12K plus TTL for it. Since then I have invested way more than original purchase price in it and well over a thousand hours. We added it up last night and I know I missed some stuff and we were over 26K easy without factoring any labor time. Truck currently has 92,800 on the body, frame , and interior Engine, transmission, and rear axle have 21K Exhaust, Suspension, and charging system have just under 3K on it. We don't have to sell this truck as it has been paid for since we bought it. I'm not hurting for cash so I'm not going to give it away. I do however need to make room as we are getting a newer car for my fiancé to drive and I can't move forward with my 32 ford truck until I get some more room. We lost the shop 18 months ago when her father got sick. The truck has been driven mainly by my fiancé to and from college (avg 9,500 a year) she is very very picky like me about where it was parked and using a sun shade to keep the interior in tip top shape. Many people have seen this truck and I have had lots of help from friends and it really kills me to write this, but we must pass on this little pavement rocket to someone that will enjoy it and take care of it. List of work that was done: Body: -Extreme painted Grille -Billet grille bolt over -Billet Bowtie -Clear marker lights -2.5 Steel Cowl hood -Tinted tail lights -Tinted TBL -Shaved tailgate -20% tinted windows -Cal-Vu full power sport mirrors -Vent shades (she liked these damn things) -Chopped antenna -GM factory roll pan Suspension: again only 3K on all suspension -DJM tubular 3" lower control arms -UMI tubular upper control arms with delrin bushings -Bilstein front shocks -Belltech 3" lowering leafs -Calvert racing Steel .5" Drop blocks -Rancho 9 way adjustable rear shocks (owned by Calvert racing now) -Caltracs low profile kit -Energy suspension bushings -Stainless custom steering shaft with stainless u joint mod Interior and Sound: -Alpine type S 12" sub in fiberglass custom box (where rear fold out seat was and I have the original seat still) -Sony AMP -Pioneer CD/MP3 Deck (will update with model number) -All factory speakers replaced with Infinity Kappa's -Auto meter electric fuel pressure gauge in 4x4 cover in dash -Passport 9500 Radar detector goes with the truck with aluminum visor bracket and hardwire kit -LED lighting Wheels: -Front 17x7 Centerline Lazers with Falken rubber 235/45/17 -Rear 17x9.5 Centerline Lazers with Falken rubber 285/40/17 Rear-end: -rear was pulled cleaned, refreshed and painted black -Zexel torsion carrier -3.42 factory GM gears -driveshaft was cut, balanced, fully rebuilt, and painted black Brakes: -Factory GM drums and AC Delco shoes -Factory red painted calipers -power slot rotors -Hawk HPS pads -ATI super blue fluid (2K miles ago) Transmission: -Tru Cool cooler with hard lines (3K miles ago) -TCS Billet 3000 stall converter (3K miles ago) -1.25" OD .25" wall DOM tubular trans cross member powder coated black (3K miles ago) -Energy suspension black and chrome urethane mount -02 trans am core with 39K on it tail housing swapped to truck style -Full performance rebuild -Vette servo -Superior shift kit -Aluminum 1/2 and forward accumulator pistons -Carbon wide band with re-enforced anchor -Alto red commercial 3-4 clutch pack -29 element dual cage input sprag -High energy clutches in reverse input, forward, overruns, and low reverse -Beast sun shell -Trans go RPM spring kit -New paper/rubber kit -New deep truck style pan Exhaust: (3K miles on all of this) -GM MLS gaskets -BRP 1.75" primary and 3" collectors long tubes ceramic coating -3" 304 Stainless ball and flange collectors -3" 304 mandrel bent/tig welded full exhaust -Stainless torctite overlap clamps on muffler inlet -Fully adjustable stainless threaded hangers -Magnaflow 14298 muffler Fuel system: (3K miles on these parts) -Factory V6 fuel pump -New GM sending unit (no more POS gauge bobble) - 6an stainless feed and return fuel lines with black fitting -Edelbrock black anodized efi to AN fittings -Edelbrock black anodized fuel filter -All lines are covered with DEI heat sleeve -8.1L injectors Engine: -05 short block cleaned and inspected -04 5.3L heads, valve job, milled .010", new Z06 springs, new rockers, new pushrods -LS2 timing set and chain -Ported LS6 oil pump -H-3 Alpha oil pan kit (cross member un-cut) -All new GM seals and gaskets -New 03 Z06 cam -0411 PCM -Painted 6.0L center engine cover -09 water pump with 160* stat (3k miles ago) -Spal Dual fans with painted 5052 aluminum custom made shroud PCM controlled -Heat sink coil packs -MSD wires -03 Truck intake -Modified 02 truck harness -BRP oil pick up tube bracket Charging and Battery relocation: (only 3K on these parts) -Optima battery -0awg battery cable -Battery relocated under bed -Digital junction box on passenger fender -145amp alternator -4awg alt, ground, and starter wiring -Battery cables DEI heat sleeved under bed -Ballistic fabrication battery box black powder coated Other: -Engine Oil and filter just changed -Transmission fully serviced -Rear axle freshly serviced -New belts, tensioner, and idler -Coolant changed work that will be done before sale: -Replace front turn signals housings ( nothing wrong with them just not as bright and new looking) -Repaint the tailgate and rear roll pan (tailgate has a few fish eyes in it and pissed me off and I hit a frog.... no joke a frog and it dented the roll pan so I bought another new GM roll pan) -Final tune tweaking with NGK AFX wideband for new injectors and the new exhaust) I'm sure I have missed a ton of stuff on the above list. The truck ran a 13.6 @ 101.XX with a 2.3 60' with the injectors at 109% and on street tires with the pre converter and exhaust tune. It has been on the track just a few times as I don't like beating on it. The truck has no kitties! passes inspection because the CEL is not on. All factory original options works (AC/Heat, Cruise control, yada yada) Truck is washed the right way once or twice a week with poor boys and adams products. Truck is also glazed, sealed, and hand waxed twice a year. The wheels are also polished and sealed twice a year. The wheels are pulled and I also detail the underside of the truck... Yes I'm that bad! Engine oil has been changed at 3K or every 90 days which ever comes first with only mobile 1 filters and oil. Trans and diff have been serviced every 10K Brake fluid has been changed every 20-30K or when I feel it needed it. Interior is a solid 9.5 out of 10. No cracks, rips, tears, smells, or stains. Truck has been in a garage since we have owned it or has had covered parking. Most that know me will tell you I'm extremely anal-retentive.. This is true, but I'm also 100% honest.. The Bad: -The roof has very very light hails dings. The truck had these when we got it and I have a buddy that owns a PDR company, but I haven't found a day to go sit and watch them fix it... Yes I'm that bad where I will watch their every move... the alignment and tire guys hate me LMAO. -The bed rails have a few dings, but remember its an S10 and even brand new GM sheet metal have waves in it on these trucks. -Their is one scratch on the bed rail that is deeper than the clear. A good touch up guy can fix this. -The bed had a hard liner in it from the first owner and scratched the bed up... the bedrug however covers all of it. -There are no door dings that I know of, but this truck will under go a full detail before it is sold and I will report if I find one... god I hope I don't because I might blow a gasket! - 2 years ago Ash hit a poll... not bad just dinged the bumper, scratched the air dam, and cracked the grille. I went to Huffines Chevrolet and bought all new GM parts (Bumper, grille, and air dam) and even upgraded to the Extreme Grille. Other than that there has been zero accidents that I know of. - On the dash bezel there is a spot where velcro was for the passport radar detector and it made the dash paint flat colored... A trim guy can fix this easily. I'm at work and this computer doesn't allow me access to photobucket. I will update it tonight with pics... I will also add pics after I fully detail the truck. Economy: -Driving it sprited in the city I get 17.5-18 MPG -Easy city driving 18-19 MPG -Highway under 70mph 25-26 MPG -highway above 70 hauling 1,000 lbs. got 24MPG Please DO NOT lowball me as that is a pure insult. As you can see I have a ton of $$$ and time into it. I'm a bit flexible on the price, but not a lot. I just added up the parts from the last go around of mods (3K miles ago) and it is over $6,000. If you were to buy a truck in this condition and build it yourself like I did you will be over the 20K mark and if you used the exact same parts you will be pushing upper 20K pretty easily. Price is at $13,500.00. No joy rides or tire kickers. Serious people only. I'm not a bank, I won't take payments. Cash, or certified bank funds only! Please let me know if you have any questions. PM for contact info. I'm located in Wylie TX. Quote Link to comment Share on other sites More sharing options...
sprayed99 Posted April 29, 2012 Author Report Share Posted April 29, 2012 (edited) PICTURES: I took it out the to race track last night for shits and grins. No I didnt run it. The truck was fully detailed. The truck has original paint except on the hood, bumper, roll ,pand, tailgate, and grille (all were replaced or upgraded. Interior Edited April 29, 2012 by Sprayed99 (see edit history) Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted April 29, 2012 Report Share Posted April 29, 2012 That's a nice looking truck, I had a 2001 LS with the ZQ8 package, it was a fun little truck with teh 4.6, I can't imagine a 5.3 in it. GLWTS. Quote Link to comment Share on other sites More sharing options...
MARTYW Posted April 29, 2012 Report Share Posted April 29, 2012 (edited) Awesome build. GLWTS! Edited April 29, 2012 by MARTYW (see edit history) Quote Link to comment Share on other sites More sharing options...
sprayed99 Posted April 29, 2012 Author Report Share Posted April 29, 2012 Sale Pending..... Quote Link to comment Share on other sites More sharing options...
Cramer Posted April 29, 2012 Report Share Posted April 29, 2012 Told you it was to good of a deal! Hope the deal goes through. Quote Link to comment Share on other sites More sharing options...
sprayed99 Posted April 29, 2012 Author Report Share Posted April 29, 2012 SOLD Quote Link to comment Share on other sites More sharing options...
Miller812 Posted April 29, 2012 Report Share Posted April 29, 2012 Dang that was quick lol Sent Via G-NEX Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.