20silverado06 Posted August 27, 2012 Report Share Posted August 27, 2012 Ok I'm new to the site and appreciate the help. I bought the viper 5704 and the xpresskit db-all for my 06 silverado(wiring should be the same from 03-06). Got everything to work( remote start and alarm). It was good till bout the fourth day. When I went to remote start the truck, it started then died then tried to restart and couldn't start. Took dash apart only to find that the bypass module(replacement on the way) had fried somehow. Any ideas or info why. I was using d2d with virtual tach. And GM 12 t harness so I didn't have to cut in to factory harness but I might install it and splice into factory harness instead when the new module comes in. can anyone help. need to know what wires need to be hooked up for the remote start harness with or without the t harness.ive looked everywhere. even matts how to thread on here.Thank you Quote Link to comment Share on other sites More sharing options...
20silverado06 Posted August 29, 2012 Author Report Share Posted August 29, 2012 no responses...........................well i figured out the most part of it. now just need to know how to power up the ign 2 wire for remote start and transmission to keep from throwing codes Quote Link to comment Share on other sites More sharing options...
mx622 Posted September 8, 2012 Report Share Posted September 8, 2012 theres a second negative output on the brain to trigger a relay to shoot power to the seconf ignition (white wire on truck) and you NEED to HARDWIRE the entire modual. have u noticed that when u unlock only the driver unlocks then u gotta hit it again fast to have the others open? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.