rdavid0412 Posted November 15, 2012 Report Share Posted November 15, 2012 (edited) This weekend I plan to : Swap balancers from my Summit Underdrive to the OEM size Fluidampner didn't do Pulley back up to a 4" on the Procharger didn't do Install the AEM 340lph and Casper hotwire kit fuel pump was fine, hose blew and Installed the harness Make a serious attempt to install the D-Max intercooler too much time and money to even think about fitting so scratch this Double check my suspension from lowering it found main eye bolt loose Service front and rear differentials with Royal Purple nope Change oil on Pro charger nope Fix the clip on my pillar pod nope Hopefully I should be able to get all of this accomplished. If I do all of the pics and stuff will be posted and attached to my build thread on here. I am hoping to have my truck running like a champ around thanksgiving so I can get a tune nailed down on it and find somewhere to make some passes with it before x-mas Edited November 27, 2012 by Full Circle (see edit history) Quote Link to comment Share on other sites More sharing options...
cb2big4u Posted November 15, 2012 Report Share Posted November 15, 2012 Looks like you have your work cut our for you. Good luck! Sent from my ADR6425LVW using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Downeast Johnny Posted November 15, 2012 Report Share Posted November 15, 2012 Don't forget to eat and sleep. Quote Link to comment Share on other sites More sharing options...
Muggs Posted November 15, 2012 Report Share Posted November 15, 2012 Looks like you have your work cut our for you. Good luck! Sent from my ADR6425LVW using Tapatalk 2 X2 good luck Quote Link to comment Share on other sites More sharing options...
rdavid0412 Posted November 15, 2012 Author Report Share Posted November 15, 2012 Thanks! I'm sure ill find time to sleep......... Hahaha Quote Link to comment Share on other sites More sharing options...
GI.SS Posted November 26, 2012 Report Share Posted November 26, 2012 get anything done rich?? Quote Link to comment Share on other sites More sharing options...
rdavid0412 Posted November 26, 2012 Author Report Share Posted November 26, 2012 Not as much as I wanted to, my brother-in-law brought me his 91 CRX and I hac to do a clutch, flywheel, rear main seal, oil pan gasket, and the dizzy o-ring. I did fix my fuel pump issue which was the hose from the pump to the top of the sending unit burst. so I kept the walbobo and just replaced the hose. I also Installed the caspers hot wire harness. and I disassembled the front to figure out id the d-max intercooler will work or not. The answer is , maybe but not worth the extra time and money for the parts. Quote Link to comment Share on other sites More sharing options...
Downeast Johnny Posted November 26, 2012 Report Share Posted November 26, 2012 Sounds like you were still plenty busy. Cool you figured out the fuel pump problem. Quote Link to comment Share on other sites More sharing options...
rdavid0412 Posted November 27, 2012 Author Report Share Posted November 27, 2012 yea but still tossing around how far I want to go with my truck. Maybe clean up the plumbing for the SC and add more hard pipe to it for a better MAF calibration. but I am thinking about puting a 3.5in pulley on and run around 9-10 lbs and call it good. I will be happy with over 500 to the wheels. Once I get there I really wanna do the Z06 brake conversion, allong with slam bags and Hydro boost. I forgot to mention that the D/S front main spring eye bolt was loose and now my CV's are popping since I lowered it. Quote Link to comment Share on other sites More sharing options...
GI.SS Posted November 27, 2012 Report Share Posted November 27, 2012 Don't you love family?!? I made it to the track still didn't break into the 13's but I'm close. You figure out what it gonna do with that UDP? Quote Link to comment Share on other sites More sharing options...
rdavid0412 Posted November 27, 2012 Author Report Share Posted November 27, 2012 Don't you love family?!? I made it to the track still didn't break into the 13's but I'm close. You figure out what it gonna do with that UDP? I gotta get off my lazy a$$ and do some work this weekend, and I will let you know there is a very good possibility they will be back on the table We need to get together sometime soon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.