Blown 346 Posted November 21, 2012 Report Share Posted November 21, 2012 (edited) I had my Viper 5704 installed, and the shop wont use the Hood pin switch as they have to use there own tilt switch.... So I had the left over pin switch and I mounted that against the inside of the bed. Basically when ever the tailgate is opened and the alarm is set the pin in the switch will extend and set the alarm off. My question is, what do I wire this to so it works? It is a one wire switch.. Im not going to pay $30 to have someone wire one wire.... Thanks,Mike Heres the setup.... Edited November 21, 2012 by Blown 346 (see edit history) Quote Link to comment Share on other sites More sharing options...
tuckinblazer Posted November 22, 2012 Report Share Posted November 22, 2012 You could tie it into your doom light trigger if its a negative input( which it should be). Quote Link to comment Share on other sites More sharing options...
Blown 346 Posted November 22, 2012 Author Report Share Posted November 22, 2012 Wouldnt I have to tap into the actual alarm wiring to have it go off? The dome light wire is connected to the alarm? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.