REAPERSS Posted February 1, 2013 Report Share Posted February 1, 2013 Can anybody post pics of the locations of the wires/how there wired? Seen a lot of post on how to wire just like to see pics of how there ran thanks Quote Link to comment Share on other sites More sharing options...
REAPERSS Posted February 1, 2013 Author Report Share Posted February 1, 2013 here are the wires i have i need to now were the black and yellow wire go to? and these thanks Quote Link to comment Share on other sites More sharing options...
BLNAWAY Posted February 1, 2013 Report Share Posted February 1, 2013 Lots of guy on here have done this I'm yet to tho wish I could help but someone should chime in soon. GL Quote Link to comment Share on other sites More sharing options...
REAPERSS Posted February 1, 2013 Author Report Share Posted February 1, 2013 thanks BLNAWAY! Quote Link to comment Share on other sites More sharing options...
REAPERSS Posted February 2, 2013 Author Report Share Posted February 2, 2013 Ok got help from a friend. Green goes to blue pin 42----- blue goes to red/green (depending on model/year) pin 33 Can you just put the green with green and the blue with blue? I don't see y it matters!! Quote Link to comment Share on other sites More sharing options...
BLNAWAY Posted February 2, 2013 Report Share Posted February 2, 2013 Well at lease you figured it out one way or another Quote Link to comment Share on other sites More sharing options...
The_aSSet Posted February 2, 2013 Report Share Posted February 2, 2013 Well your blue and green wires aren't connected to anything so make sure those go in the right place on the harness first. Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted February 2, 2013 Report Share Posted February 2, 2013 I cant offer much help except to try a search as this topic came up a few times if your in a rush, also I think those wires need to go directly to those wires need to go directly into the back of the computer connector. Sent from my DROID BIONIC using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted February 2, 2013 Report Share Posted February 2, 2013 yeah the pins he is referring to are on the PCM connectors. you have that right, and it is important that you match those two wires as one is the high fan, one is the low fan. and ovbiously dont drive the truck without a tune first! Quote Link to comment Share on other sites More sharing options...
REAPERSS Posted February 2, 2013 Author Report Share Posted February 2, 2013 Ya I have a tuner ready when I'm ready. Truck was tuned by Justune he has a shop 2 minutes from my house I'll be good thanks guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.