Thiet Posted January 6, 2014 Report Share Posted January 6, 2014 Hi , Is it possible to switch on the both tail light 7w of 21/7w bulbs simultaneously ( upper(light/brake) and middle(blinker) 7w bulb) ?? i have just the 7w upper and lower little bulb (side marker) and "side marker" is illégal in Belgium :-( , it's not very lightning i think , i know i must change the middle(blinker) soket bulb to light/brake soket , but i don't know how to make deviation(deflection) wire ???? Somebody have an idea ???? I hope everybody understand what I try to explain lol Thanks everybody Quote Link to comment Share on other sites More sharing options...
NipRing Posted January 6, 2014 Report Share Posted January 6, 2014 So are you saying you want both bulbs to act like the brake bulb or the parking light bulb? And the fact that there is a SSS running around in Belgium…is awesome! Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 Yes. It takes a new socket and t taps Quote Link to comment Share on other sites More sharing options...
Thiet Posted January 6, 2014 Author Report Share Posted January 6, 2014 Yes Chawkins , soket + t-taps , to Nipring , i want to conserve brake and blinker bulb fonctionnality, but switch on the 2 parkings lights simultaneously lol , and i don't know how to make the déviation(déflection) wire with the t-taps It's not easy to explain for me lol my english isn't very good , but i trie to do my best !!! lol Thanks a lot Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 I did a writeup on another site for the front but same info applies to the rear. When I get home I will dig up my info. But here is a cell pic I took during Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 Take a pic of the sockets on your tails so I can give you correct info for the rear. Basically so I can tell you where to tap and if you need new sockets. Also if you can procure a test light it will help you out Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 http://www.gm-trucks.com/forums/index.php?/topic/155427-DRL-on-with-Parking-Light-99-07 Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted January 6, 2014 Report Share Posted January 6, 2014 *Topic moved to correct section* Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 That is my write up Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 6, 2014 Report Share Posted January 6, 2014 Parts: 2 each- GM 15306147 sockets or equivalent 2 each- 18-22 gauge T-taps Here are the plugs Pin B is tail light Take the lower turn signal socket and replace with the new socket. Wire up Pins A and G as they were before. The tap Pin B of the new socket to Pin B of your Tail light socket. Here is where Pin B will be on the new socket Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 7, 2014 Report Share Posted January 7, 2014 If I get my new tail lights tomorrow I will do this. Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted January 7, 2014 Report Share Posted January 7, 2014 Here is my write up on this. I did it today http://www.silveradoss.com/forums/topic/84293-4-tail-light-mod/ Quote Link to comment Share on other sites More sharing options...
Thiet Posted January 8, 2014 Author Report Share Posted January 8, 2014 A very Big Thank you chawkins & Dude I'm going to take pics of my sockets tomorrow because it's not the same i think Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.