poopnewton Posted February 27, 2014 Report Share Posted February 27, 2014 So first I'd like to start off by saying I have a VHO and not a SSS so don't nobody make fun of me for asking. Now that I got that out the way, back to the question. If I were to jack up my torsion bars to level the ride height out on my truck, what do you think would be the both tallest and widest 20" tire I could fit on my truck without rubbing. Quote Link to comment Share on other sites More sharing options...
NipRing Posted February 27, 2014 Report Share Posted February 27, 2014 I have 305s on the front of my SS, if that helps. No rubbing Quote Link to comment Share on other sites More sharing options...
chawkins6789 Posted February 27, 2014 Report Share Posted February 27, 2014 305/55R20 possibly, 285/55R20 and 275/60R20 will run fine with no rubbing having a torsion crank Sent from my SM-N900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Brentd Posted March 2, 2014 Report Share Posted March 2, 2014 305/55 is almost a 33.25" inch tire. Looking at how my crew cab vmax sits with 305/50/20s with front end sitting at stock height, I would think a little over a 1/2" all the way around the tire would clear pretty easily with a crank on the torsion bars. I have no problems with the 32s, but i did clearance my air dam slightly at the bottom corners back when I had 10" wide 24s with 305s on them because of a small amount of rub when turning with simultaneous slight suspension compression. Like Chris said, you would probably be good with the 305/55. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.