DEESS Posted April 11, 2014 Report Share Posted April 11, 2014 Hello! I have a 2003 SSS AWD, and I'm having issues with my transmission. The Truck will reverse fine, but will not move in drive. I can Manually shift it from 1,2,3 fine but it won't go in Drive. Does this mean my transmission is gone or maybe a solenoid is bad. Quote Link to comment Share on other sites More sharing options...
2bfast Posted April 11, 2014 Report Share Posted April 11, 2014 Forward sprag is broke in the input drum Easy fix but the trans will have to come out and apart Quote Link to comment Share on other sites More sharing options...
Blown 346 Posted April 11, 2014 Report Share Posted April 11, 2014 Also make sure to have the converter looked over. I shattered my sprag and the converter ended up having to be replaced. You dont want to fix the trans and then have the converter go from the first incident. Quote Link to comment Share on other sites More sharing options...
Bigtoyz97 Posted April 22, 2014 Report Share Posted April 22, 2014 depending how good a converter you have you can have it gone through. They cut it apart with a lathe at the weld and can replace the internals. When I had my stock motor and SC I had them do some work to mine and it raised the stall to a vette's stall and did some upgrades while they were at it. Was nothing big was just the thrust bearing and couple other things. And was only 100 bucks or so but that was 15 years ago. I know if I have to rebuild the one in my car.....that is what Im going to do with that one. Have a 1200 dollar one with 5 disc lock up that you cant get anymore and way cheaper than a new one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.