Atomic Posted September 3, 2014 Author Report Share Posted September 3, 2014 Ride quality is much improved, especially if you compare to a similar height lowered setup. It should only take about an hour or two to install with the uppers taking the majority of the time. Total swap shouldnt be more than $750 or so depending on parts and where you buy. Quote Link to comment Share on other sites More sharing options...
Atomic Posted November 5, 2014 Author Report Share Posted November 5, 2014 Ok so I got the new new uppers in and tacked them together to mock up. Literally moved it as far over as I could. It gained approximately 3/4" of an inch more clearance from the UCA and raises the mounting point 3/4" from using the procomp adapter. The only bad thing is these will not work with the factory shocks, so if you decided to go back to stock you will need to remove these first. These should let lowered guys use the next size up in shock, or go approximately 1.5" lower. I dont have them fully welded yet or powdercoated, but hope to by the end of the week. I would really like someone that has a 6" lift to test these before I order more to make sure they work. I only bought enough to make 3 sets. PM me if you have a 6" lift and want to try them, and Ill give you a discount ;) Quote Link to comment Share on other sites More sharing options...
ivin74 Posted January 9, 2015 Report Share Posted January 9, 2015 holy shit that is fast, great job Quote Link to comment Share on other sites More sharing options...
Atomic Posted January 11, 2015 Author Report Share Posted January 11, 2015 Haha thanks! I have plenty of these kits ready if any of you guys want to try the swap! Quote Link to comment Share on other sites More sharing options...
Atomic Posted April 8, 2015 Author Report Share Posted April 8, 2015 I frequently get the most questions regarding what shock and spring to use, so I made a spreadsheet to try and simplify the process. I attached it to this email. Feel free to PM me if this doesn't fully answer any question you have, but it should give you a good idea. Let me know what you guys think! I still have sets for sale! PM me if you want some! Thanks,Richard Shock-Spring.zip Quote Link to comment Share on other sites More sharing options...
Atomic Posted April 26, 2015 Author Report Share Posted April 26, 2015 Edit: I updated my PDFs to include details on the lifted-style upper mounts. This is the same document as before with some additions to include more information. PDF Explaining the swap: http://www.mediafire.com/view/vkzapsyvtwu5rv9/coilovers_about_v12.pdf PDF Explaining the installation process: http://www.mediafire.com/view/35n4kssw5cy4ddg/coilovers_install_v12.pdf Quote Link to comment Share on other sites More sharing options...
kaze_v8 Posted April 27, 2015 Report Share Posted April 27, 2015 How low can you go on these coilovers? Quote Link to comment Share on other sites More sharing options...
Atomic Posted May 13, 2015 Author Report Share Posted May 13, 2015 Well with all stock componenets its generally a 3-4" drop, but the swap can be combined a drop spindle to go a little lower. Its not going to be slammed but the cv will be pretty negative. Quote Link to comment Share on other sites More sharing options...
Atomic Posted January 7, 2016 Author Report Share Posted January 7, 2016 I updated the links in the first post and also added an updated spreadsheet I made to help pick out shocks and springs. I am still making these so let me know if anyone is interested via a PM here or shoot me an email at rkwayne at gmail dot com. Thanks! Quote Link to comment Share on other sites More sharing options...
Atomic Posted June 27, 2016 Author Report Share Posted June 27, 2016 I still make these if there are any new takers! Feel free to email me at [email protected] with any questions Quote Link to comment Share on other sites More sharing options...
Atomic Posted November 12, 2016 Author Report Share Posted November 12, 2016 I just wanted to let everyone know that I do still make these brackets and I finally made a website. You can order directly through there, or email me at [email protected] and I can get you taken care of! I also offer custom aluminum tanks and remote tuning if you are interested. My website is www.atomicfabandperformance.com Quote Link to comment Share on other sites More sharing options...
Downeast Johnny Posted November 12, 2016 Report Share Posted November 12, 2016 I just wanted to let everyone know that I do still make these brackets and I finally made a website. You can order directly through there, or email me at [email protected] and I can get you taken care of! I also offer custom aluminum tanks and remote tuning if you are interested. My website is www.atomicfabandperformance.com Bookmarked Quote Link to comment Share on other sites More sharing options...
ugitnbeat Posted February 3, 2017 Report Share Posted February 3, 2017 I would like to purchase these brackets....can you send me a price? Quote Link to comment Share on other sites More sharing options...
1981evildisco Posted February 4, 2017 Report Share Posted February 4, 2017 Go to his website lol Quote Link to comment Share on other sites More sharing options...
someotherguy Posted October 30, 2018 Report Share Posted October 30, 2018 (edited) On 2/4/2017 at 7:32 AM, 1981evildisco said: Go to his website lol I know this is an ancient post but still a current product, don't think I've seen his site linked here so after hunting it down it's https://www.atomicfabandperformance.com Richard Edited October 30, 2018 by someotherguy (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.