AugustBurnsRed19 Posted June 29, 2014 Report Share Posted June 29, 2014 I am considering getting a sonnax input drum with the billet 300mm input shaft. Now will that input shaft fit with the stall converter? Quote Link to comment Share on other sites More sharing options...
AKSSS Posted June 29, 2014 Report Share Posted June 29, 2014 The part of the shaft that the converter goes onto should be the same as stock. I had a billet shaft in my 65e and I ran the stock converter until my precision came in. I never even told them I had a billet shaft. They are 300mm? As in a measurement or 300m as in type of material? Quote Link to comment Share on other sites More sharing options...
AugustBurnsRed19 Posted June 29, 2014 Author Report Share Posted June 29, 2014 Lol not 100% sure on that it says 300mm billet input shaft Quote Link to comment Share on other sites More sharing options...
Atomic Posted July 8, 2014 Report Share Posted July 8, 2014 The same will be the same, ist just a billet piece instead of cast or forged. As a side note, I dont really think its needed unless you plan on locking the converter under power, which I also dont recommend. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.