Wizard Posted October 22, 2004 Report Share Posted October 22, 2004 I'm gettin ready to install my Procharger. Does anyone know what part # for the 42 lb injectors is? What type of connection style is it? Thanks in advance. Wizard Link to comment Share on other sites More sharing options...
smithl3 Posted October 22, 2004 Report Share Posted October 22, 2004 Wizard, I know BenKey has a good site for them. If you can try to get the same height as stock injectors and get the same new style 2-prone connector. The ones I ended up getting were Bosch 42#, from muscle motors. They were about another 1/2-3/4" taller than stock and had an older v-6 style connector. I had to wire in new connectors. It was a serious pain in the ass. SO if I were you do some homework and see if you can get the stock size but higher flow rate injectors. Good luck Link to comment Share on other sites More sharing options...
vdrumright Posted October 22, 2004 Report Share Posted October 22, 2004 I got mine at www.racetronix.com. Multec II Stubbies they are plug and play... Injectors Link to comment Share on other sites More sharing options...
cadowns Posted October 22, 2004 Report Share Posted October 22, 2004 That is the correct injector for our truck. PNP install. CD Link to comment Share on other sites More sharing options...
Wizard Posted October 22, 2004 Author Report Share Posted October 22, 2004 Thanks fellas Wizard Link to comment Share on other sites More sharing options...
BenKey Posted October 26, 2004 Report Share Posted October 26, 2004 Arizona Speed and Marine also sells them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.