Vortec MAX Posted January 4, 2007 Report Share Posted January 4, 2007 I just ordered a GM Performance Parts exhaust system for my Vortec MAX. I actually ordered the one that is for the SS. I also got the double wall angle cut tip for it. The part numbers and prices are as follows: GMPP Exhaust - 17800765 - $404.95 GMPP Exh Tip - 17802143 --- $74.95 Shipping Charge --------------$48.95 The system is made by BORLA. Jay Reinhart from BORLA's OEM Development Dept tells me it will outflow stock and I will be quite happy with the power, mileage, and sound improvements. He says the pipe diameters are the same as stock, but mandrel bent with a high flow muffler. The tip is double wall, polished stainless steel, angle cut, with a bowtie logo. I just thought I'd pass along the info for my fellow V-MAX owner's. I will post pics of the system when I get it. I will give a full report and more pics once I install it. Mike Quote Link to comment Share on other sites More sharing options...
2006BLKB4V Posted January 4, 2007 Report Share Posted January 4, 2007 Mine should be going on this weekend! Tell us what you think Quote Link to comment Share on other sites More sharing options...
misterp Posted January 4, 2007 Report Share Posted January 4, 2007 ...I will give a full report and more pics once I install it. Mike Can you post a pic of the muffler too? And is it a straight-through one or internally baffled? Mr. P. Quote Link to comment Share on other sites More sharing options...
2006BLKB4V Posted January 5, 2007 Report Share Posted January 5, 2007 I can't post a pic, but i can tell you it is straight flow through with perforated piping through it. Like many borla's are. The pipe that came with it is really nicley done. All the welds are perfect. It comes with clamps and looks like a 30 to 40 minute job to install. I haven't installed mine just yet, but by sunday night i oughta find the time. Quote Link to comment Share on other sites More sharing options...
desrtrat Posted January 5, 2007 Report Share Posted January 5, 2007 and a sound clip also..... Quote Link to comment Share on other sites More sharing options...
vmax2fast Posted January 5, 2007 Report Share Posted January 5, 2007 and a sound clip also..... <{POST_SNAPBACK}> caint wait to hear more! Quote Link to comment Share on other sites More sharing options...
misterp Posted January 5, 2007 Report Share Posted January 5, 2007 I can't post a pic, but i can tell you it is straight flow through with perforated piping through it. ... That's going to be really nice Quote Link to comment Share on other sites More sharing options...
NashSS Posted January 12, 2007 Report Share Posted January 12, 2007 Any word on the exhaust yet i want to hear a sound clip and pics becuase im thinking of ordering the same thing. Thanks. Quote Link to comment Share on other sites More sharing options...
Vortec MAX Posted January 12, 2007 Author Report Share Posted January 12, 2007 It hasn't shipped yet. They should get it in any day, then they will ship it to me from Ohio. Maybe the end of next week. I hope. I can tell when it ships because my credit card will be charged. Mike Quote Link to comment Share on other sites More sharing options...
Vortec MAX Posted January 26, 2007 Author Report Share Posted January 26, 2007 (edited) Well, I got the system on Wednesday (01/26). It is very nice. It exceeds all my expectations as far as looks. I still need to get it installed. Since the temperature has been in the teens here, and I have been forced to park my truck outside because contractors are finishing our basement, it might be a little while. The tip arrived slightly damaged, so I might return it and get another. They put the tip in the box with the kit, and the muffler cut a half moon shaped chunk out of the box the tip was in, slightly dinging my bling. I plan to take some pics and post them, but I will describe the kit: The tip is DROP DEAD GORGEOUS! It is well worth the money. It it polished and has a bow tie logo that is stamped from the inside so it projects out at the top of the end. It is double walled, so it looks like it is made from solid material approximately 1/2" thick. It is very nicely finished. It looks expensive. Even the inside (throat) is polished. The muffler is shaped like a stock muffler and similar in size. If you look inside the 3" end, you can see right through it to the two outlets on the far side. It is a VERY open design. In fact, it looks like there might be an inch or so of packing material all around the oval shape inside, backed up with perforated stainless steel panels. It looks like a smaller perforated oval inside a bigger solid oval with the material in between. The outside of the can is stamped from the inside with a GM Performance Parts logo on the top and bottom (semi flat sides). This creates a logo that stands out from the can, similar to the bow tie on the tip. The tubing is mandrel bent (very smooth bends) and very high quality. It has stock looking hangers welded to the sections and it looks like it will be a breeze to install. Again I will post pics when I get a chance. Mike Edited January 26, 2007 by Vortec MAX (see edit history) Quote Link to comment Share on other sites More sharing options...
Raced Guy Posted January 30, 2007 Report Share Posted January 30, 2007 If you can get a sound clip for sure !!! Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted February 1, 2007 Report Share Posted February 1, 2007 I have the exact same kit on my SS and I love it. Nothing else can beat the price, you won't be dissappointed with it. Quote Link to comment Share on other sites More sharing options...
vmax2fast Posted February 1, 2007 Report Share Posted February 1, 2007 I have the exact same kit on my SS and I love it. Nothing else can beat the price, you won't be dissappointed with it. I'm very interested.... any audio Fireman31? Quote Link to comment Share on other sites More sharing options...
misterp Posted February 5, 2007 Report Share Posted February 5, 2007 I heard this catback on TV yesterday; Trucks! (SPIKE channel) they had a 10-minute feature putting bolt-ons onto a 2007 4x4 VMax truck and they used the GMPP intake and GMPP (Borla) catback. It sounded pretty good, with a distinct character; the only way I can describe is kinda like a cross between a Corsa Touring and a Flowmaster 50-series. And I'm sure has it has near the same performance of the Corsa & Magnaflow products. Mr. P. Quote Link to comment Share on other sites More sharing options...
nxtnlne Posted February 5, 2007 Report Share Posted February 5, 2007 Called Corsa and Borla and they said they don/t make the GMPP exhaust.price for there catback setup was over 800- 1,500??????? Called my Local chevy dealer and the price for GMPP Exhaust #17800765 was $680.00 WTF. Where did you get the price Mike? Best I could find was at pace performance for $429.95. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.