stylnss

Late follow up. Installed 1'' shackle with 2'' hanger. Drove it around for awhile and it settled in nicely. Very happy with height and ride.

Ebay Item number: 250342536352

Selling my Belltech 2'' lowering shackles on ebay. 2'' $ 30 bucks includes shipping to any 50 states http://cgi.ebay.com/ebaymotors/ws/eBayISAP...IT&viewitem= Item number: 250342536352

Selling my Belltech 2'' lowering shackles on ebay. Part # Bel-6400 $30 includes shipping anywhere in the U.S. Still in the box. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...IT&viewitem= Item number: 250342536352

Had to throw in some after pics. Rides nice. no complaints

Thanks bro. Took long enough. Still have the slightest vibration. Especially when my trucks is weighed down. Still need to install carrier bearing relocator. Ive heard that should take care of the problem.

Slammed bowtie not to get off the subject but hows the side exit sound. alot of interior noise? Thanks

Thanks slammedbowtie. Your ride looks sick too. I havent bottomed out yet. Just keep hitting the damm tailpipe on the axle. did you have the same problem? Turning my keys a few twist did take out some of the comfort and control. Gonna get new keys and shocks soon. Should help alot.

A couple of twist and its more like 3-4

Just finished my Belltech lowering kit. Went for the shackle, hanger and spindles. First I went for the 2'' shackle and 2'' hanger and drove if for a day and said way too low. SS has already 1'' lower than stock so it tucked 20s. Had to buy the new 1'' shackle cause its not adjustable and now I am finally happy. Also replaced bumpstops and removed bracket. Threw in some shims but still have a little shake. Planning to install carrier bearing adjustment plate. Hopefully will take it out completely. Also need to adjust Stock tailpipe cause its hitting axle. Never knew how much tweaking it would take. Just need to Throw some new shocks in and I'll be very happy with ride. Very much like stock except for of course the travel loss. Does corner very nice. Especially at higher speeds. Hope this Helped. Suspension can be tricky and it took me quite a while to get it dialed in.

bump

Just wondering if anyone is running belltech hangers and 1'' shackles. How does it ride? Any pics too? Thanks for the input, trying to figure out what I want to run in the back.

Just got some power adj seats for the truck. Have a 05 with airbag sensors. Bought some 03 leather ones. Any help or info to do the change. Can I just run a 12 volt and ground? Thanks for the info

12s Rock where did you get those silverado ss decals. I cant find them anywhere. Thanks

Thanks for the help. Do you think the 1'' shackle should get the back from being uneven. Higher on pasenger. btw Im not doing any damage by driving it?

Let me know if you have a pair of drop shackles for sale. Thanks

Your right. I do have vibration from 20-25. Thought it was the shims still in there from earlier. Trying to decide whether I want to take out hangers and replace to stock. What a waste! they were a pain to take out and just run the shackles. Or go with a 1'' shackle combo. Anyone running that belltech 3'' in the rear?

Probably would keep it to a 3'' drop for the back like most guys. It is lower on the driver side rear by about a half inch.. TT belltech today and they said I shouldnt run the hangers only with stock shackles. ????? The other day they said no problem. Getiing confused now. Anyone running belltech in the back. Thanks again for the info.

Im running stock 20s with stock 55 rubber. was tucking on only one side and other side was like 1 1/2 inches higher???? will post picks today with stock shackles. Didnt take any pics on the 4'' drop. Didnt sit right at all though.

Just put back my stock shackles tonight. Rides alot better now. Do you think the belltech hangers with stock shackles would mess my pinon angle up pretty bad? Is anyone running the 1'' shakle with the hangers ? Thanks again for the info. Talked to belltech today. They said those other holes on their shackles are not for adjustment. Go figure

Sounds like the right thing to do for now. Thanks for the reply. Have installed new bumpstops but no new shocks yet. Just found out guys running 4'' in back are doing mini c notch and have to cut exaust because of clearance. Dang should have gone for the 3''.

Installed 2'' spindles up front and 2'' shackles in back a while ago. Just installed 2'' hangers and its sitting too low now. Bottoms out real easy now and only one finger gap between tire and fender. What should I do? put back factory shackles? Belltech said their not adjustable. They have either 1 or 2''. . Thanks for the suggestions.

Off my 05 SS. 3 piece factory lower grills. Ebay Item number: 250259464616 Items ends 6/20 3:20 pm pacific time

Pics? Front and rear

Wondering if anyone has smoothed and painted their dash. What the process is like. What kind of paint you use and method for smoothing out. Pics would be great too. Thanks