[Rear Window Replacement Arms]

I have been searching this forum and ebay trying to find the longer replacement arms to snug up the rear latches. I found a thread from Bill04ss showing the install but can't find where he purchased them. Anyone know if these are still available anywhere? Thanks.

[Loan Question]

The problem you may have is that typically banks will not consider custom work on a vehicle for its appraised value. They also won't typically loan you more than the blue book value on vehicle in its original condition. If you are seeking a loan greater than what the s-10 would be worth based on blue book without customization, you won't likely get it. Its alll about security for the loan.

[What Pulley For Supercharged Joe Gibbs Silverado]

I have the 6.0 with a radix, but I believe a 3.0 or 3.1 with a 5.3 will be a lot of boost. Check with some guys running the radix with a 5.3.

[Credit Score Problems]

I agree with Hank. Consult with your divorce attorney.

[Stickers.]

Only stickers I have are on the radiator cover, with the Silveradoss.com front and center. It is a pain though because you need to remove the cover whenever working on the engine or you will damage the stickers leaning on them.

[Bser Rollpan Question]

Thanks all. Guess I will be speaking with the body shop.

[Bser Rollpan Question]

Thanks Guys. Brad, when you say it needs to be fitted, does that mean that the ends need to be trimmed before it can be installed?

[Bser Rollpan Question]

Mine is coming in and getting painted this week. I did a search and it seems that I will only have to drill a couple of holes to install it myself (not a body guy). Once painted, can a novice install it? Also, while the other post didn't mention it, I assume you can just unbolt the bumper from below and don't need to take off all the plastic? Thanks in advance for any information you can offer.

[Addco Sway Bar]

Joe

 

I pulled my spare and mounted it in the bed for easy removal.

[Addco Sway Bar]

Thanks. That was my thought, but it is not what the directions say.

[Paint Code]

Thank you

[Addco Sway Bar]

I installed the sway bar today, but am a bit confused by the directions. They seem to say that where the u bolts connect to the cross member and axle I should leave 3/16 inch of play. Should these u bolts be secured tightly or is there play left there? Thanks.

[Paint Code]

Can someone tell me where to find my paint code? I have an 03 black SS. There doesn't seem to be anything in my box or on my door that says paint code. Perhaps I just dont know what I am looking for. Thanks.

[My Crappy Track Run]

Brad

 

I am 99% sure it is the black cylinder next to the compressor (driver's side), if I remember correctly.

[Vitamins And Supplements]

Unless you train heavy, I think you are hitting the most important 3 - more fiber (flax seed); omega 3 and 6s; and a good multi vitamin. If you weight train regularly, I suggest whey (fast release) and casin (slow release) proteins as needed.

[Leavin The States]

Thank you and be safe.

[Selling The Regency Rst]

Tyler

 

PM me with a price on the roll pan. Also, what is the condition? Thanks.

[Another Nitrous Thread...]

that is a nitrous express kit...check the link

 

 

sorry ... meant to say nitrous outlet kits not nx

[Another Nitrous Thread...]

Check out the nitrous express kits. You get more for the money.

[Nos]

you guys are really starting to peak my interest on this nitrous. Now I have a question. Will I need a new fuel pump to up the fuel pressure or can i do that with a tune? Im basically wanting to know if I need anything other than the lines, soleniods,jets,bottle,bottle heater, guage,activation switch,and the other safety things.

 

If you go with a dry kit, you will need to retune for more fuel. If you go with a wet kit, the fuel is added with NOS by tapping the fuel rails. You shouldn't need a new fuel pump unless you are close to maxing out now. What you listed should be about it. I just bought the truck plate package from Dave's today. Great guys to deal with.

[Nos]

Dave's Nitrous Outlet sells a great complete package with a plate kit for the stock truck throttle bodies. It includes everything you will need. I plan on buying it shortly. They are also very helpful and informative. I have been speaking with Ray and he has been very helpful.

[What Rpm To Set Window Switch For An A 100 Shot?]

From what I have been reading you probably dont want to spray below 3000 and should not spray through the shifts. I am not sure why you couldn't spray in first as long as you bgein after 3000 and end before the shift to second (maybe 5800). That is based only on recent research as I plan on going with NOS with my radix this summer. Maybe others with more experience will chime in.

[Hello All]

Congrats on the new truck. welcome

[New Guy]

Welcome. I plan on trying nitrous for the first time soon.

[Should I?]

If its in top condition, 18k for that truck is a good deal in my opinion. I wouldn't wait, but if you do, some pop up for sale on this site from time to time. Good luck.