mikeczech79

I have a probox in my truck with just a 10 inch alpine s sub with kenwood 1000 watt amp which we all know that it does not have 1000 watts , anyway it sounds really good,it is a down firiing box made out of some special material i guess. The only thing i dont like about my box is that i can not put a sub with a big magnet in it.Other than that it a good box .

Is it making a weird clicking noise when you are driving?

Well Charley, you are absolutly right about the truck not starting becouse of alarm system. I was able to start it after i reset the alarm and then drove it home. And now it only starts with the remote control,when i try to start it with the key it starts and stalls right away.So im gonna have an alarm guy look in to that tomorow.The dealer told me that the cats are clogged,and could not get any code readings. I have to say that was the last time that i ever bring my truck to the dealer . They didnt charge me anything becouse they could not start it ,so thats good. Thanks a lot for everyones help. Talk to you later Mike

I wish i had an extra one to try that out with,i sent my original one to Wheatley .Im not sure what they did with the truck ,but im going there in the morning to see .I just hope they can get it to run again, like it did when i drove it there saturday .Ill let you know what happenes .

I really hope that does it ,i will know tomorrow and will be sure to find out what the fuel presurre test results are.Thanks you for your advice Mike.

I have to wait till tomorrow now becouse they are closed today.I will have them do that, but do you know will that reset the pcm back to stock ?

I had the same problem with mine .I had to replace the one behind the passenger side air bag,it was making this clicking sound and it would blow hot air too.Im not sure which one you have to replace there is like 4 blender actuators under your dash.You have to remove the dash ,air bag passengr side handle.once you remove the dash you will be able fo find where it is.Its not too bad .took me abou 45 min.

The tune was installed about 15 months ago,and everything was fine and the truck ran great.But couple of months ago i noticed when i put the pedal to the floor it would hesitate at about 4000 rpm and would not shift right and the check engine light would flash for a few seconds. So i did a tune up changed the spark plugs ,wires, fuel filter, pvc valve,but it didnt fix anything.So i took it to the dealer yesterday and they called me about 5 oclock asking me how to get it to start .They said its not pulling any codes and didnt tell me what the fuel pressure test results were ,the truck tries to turn over ,but wont start

Hi guys i really need some advice.I took the truck to the dealer today,to have it checked for any codes.And they did the fuel pressure test,and now they cant get it started.The truck turns over but it stalls right away.And it sound really weird and loud when you try to start it.The reason i took it there is becouse the truck will not go past 4000 RPM. Does anybody know what the problem might be? All i have on the 03 sss truck is outlaw air intake and Wheatley Tune. Does this have something to do with a PCM relearn? Or the security relearn. Any advice is really appreciated .Thanks Mike

Will this scoop work with the Outlaw intake?

Time2Kill has a complete driver side mirror for sale for $50.00 check with him.I know the glass it self costs about $360.00 Thats a good deal

I had a same the same problem with my truck about 2 months ago and i fixed the broblem myself,the dealer wanted $600.00just to take the dash apart and extra money to fix it ,yeah right.The actuator behind your passanger side air bag is bad.It is very easy to fix ,you do have to take the dash of which is not hard.I also replaced the Resistor which control the fan speed its located by the passanger side under the glove box in black plastic duct ,use the search bar to find a how to take the dash off.good luck Mike

I have an Orion H2 10.2 sub for sale. Its 2000 watt RMS 2500 watt peak.The sub is 7 months old in a perfect condition. Im asking $200.00 let me know if you are interested, or you can call Mike at 407-733-9161 ,This sub is no joke...too much bass for my style.

Do you have the PCM for sale?

Does anyone have the PCM for sale?

The paint thinner will work good for oil base paints only.Try Denatured Alcohol if it is latex paint,or the clay bar works great.The reason i know this is because i own a painting company,and have had overspray on my other truck before.Good luck.

How much do you want for it?

Yes,i do have the turn signal in the glass.

I have the head unit i can sell you ,let me know if you need it still. I also have the two bose tweeters.

Would you sell the mirror ?.If so ,let me know.

Do you have the driver side mirror? If so,how much? I need one asap!! Thanks Mike

Does anyone have the driver side mirror ,the glass only. If you have one, you wanna sell please let me know ,Thanks Mike.