0360z71

do you still have and how much shipped to 29431. what name brand also? Im me thanks

This is what im in need of lol but it would cost a arm and leg to ship it too 29431. glws

Open to reasonable offers!!!!

I got the stock 317 heads off my ss 6.0 with around 50k or so miles for 175 plus shipping and paypal.. Also i got a 3000 TCI stall converter i bought for my truck but its to big for what i do with my truck so i want to get rid of it. I paid 616 for it and i might have got 140 miles on it ill take 500 plus shipping or best offer..

BUMP!!!

ttt

!!!!!!!!!!!!!!! 317 CASTING 6.0 HEADS!!!!!!!!!!!!!!!!!!!!!!!! I took them off my 2003 lq9 6.0 they had right at 55k miles on them. The motor that they came off was stock with a tune. I just went to 243 casting heads and no longer need these. 175 plus shipping!!!!!!!!!!!!!!!!!! and pay pal fees!!!!!!!!!!!!!!!!!

Will these fit a 2003 z71??

i HAVE A SET OF 317 STOCK HEADS COMPLETE WITH SPRINGS AND VALVES. 55K MILES ON THEM OFF A STOCK MOTOR JUST WENT TO 243 HEADS. I AM OPEN TO TRADES OF SAME VALVE AND SOMETHING THAT IM NEEDING OR 200 BUCKS PLUS SHIPPING AND PAYPAL FEES. NEED THEM GONE ASAP THANKS FOR LOOKING!!!!

yea they are stock heads and they will fit the 5.3 but not sure if it will help aor hurt the power!

Ne one the heads is down to 200 plus shipping and paypal fees!!!

i know that my friend put a new one in his truck and the aftermarket one was new and it didnt read any miles. Put the factory back in and it reads what was on it. So from what i see they saved in the clusters. They told him that the dealer had to program it for him.

Bump!!!

I have a few things left that i need out of the way. Were off 2003 silverados -317 casting heads $250 -lq9 stock cam $40 -7 coil packs and the brackets and wiring $75 -passenger power mirror with turn singal $30 -drivers side door wiring harness (bose and heated seat ) $30 -driver side window tinted $65 -washer jug and motor $30 -driver side window regular assembly $40 -drivers rear ext cab door complete $100 -stock manifolds 6.0 $30 -drive by wire throttle body $75 -cabin light housings $10 -on/off air bag switch $10 -drivers inside door handle $10 -air bag module $10 -jack bag missing some peaces $10 -3:73 gears for front diff missing two bolts in the ring gear $35 -front diff carrier complete $100 All prices are plus shipping less you can pick up Thanks

I have the stock 317 heads off my 6.0 with about 55k miles on them. Ill take 250 plus shipping. May be interested in trades!! I also have the stock cam $100 plus shipping

Ok i been looking around and found the truck stalls that yank offer the 2600 and the 3000 stall they say that they dont lose anying towing with them so i may just go that route so i can run a bigger cam!! Ne one can back this or have ne thing that would help me in this route?? Thanks

Bump

Cool whats the specs of the cam and where does it pull at and stop??

DO you have a stall and do you pull anything??

Yeah I see what your saying not sure what year the lq4 is either or not yet ne ways. Who can balance them just a regular machine shop or na? Alos Ill get pics of the crank as soon as i get over to the shop. Also i dont know how long the crank was broke i just know that it was wrecked 23k miles ago lol but from the ware its been broke for a while and also like i said when i loaded it it ran for a fact just had a little tap lol thats y we thought it just need an oil pump. But before it never make a noise at all and ran great. IDK!! LOL!!

I got the motor out of a wrecked 2003 ss. It hit a tree hard in the front broke the water pump pulley off but everything else looked great i put it in well the balancer looked bent but i didnt have another one so a let it ride cause in wasnt bent that bad. Well i put another 23k miles on it and the oil pump went out on me. I pulled the motor to go ahead and change up a few things and replace the oil pump when i found that the crank was broke right behind the first main and has been broke for a while!! The block is at the machine shop might have to be line bored but he said it looked good. Everyone says that it just broke cause it was no way that it could have ran like that but shee by the rare and plus when it lose oil pressure and my friend came to pick it up we couldnt push that heavy truck up on the trailer and we started it and pulled it on the trailer.

Hey I have the Lq9 in my truck but i broke the crank. My ? is is the Lq9 and the Lq4 running the same crank? I got a friend that has one just wanting to make sure before i got it and cant use it.

Hey if i was to run a 2500 stall would that hurt my pulling at all?

Stall? and do you pull ne thing and do you got a sound clip? Or Ne one else?

The idle i just really want to here it everyone is tellin me to run a 208/212 on a 115 lsa or 212/218 low lift im thinking its on a 112lsa