Jump to content

rattlindodge

Member
  • Posts

    54
  • Joined

  • Last visited

Posts posted by rattlindodge

  1. Well i cleaned the junkyard MAF and took it for a test run and the code come back within a few miles, so im gonna clean my original and see what happens. The truck is going to the dealer for a wack cluster, so maybe ill ask for them to check into the cats at the same time. THis dealer has been a good dealership for warranty work on our junk 2000 6.5 diesel.

  2. So i took my truck in to the shop for a p0430 code, they said it was the mass airflow sencer. So i put a junk yard one in and about day later the same code came back. Is there any way to test the mass airflow sencer? Im gonna see if the junk yard will swap it out with other. I got a k&n filter, they said that was the cause, but it wasnt over oiled?

  3. So my 04 Silverado ss has this noise. First you will only hear it when the engine is under a load , so like when it shifts into say 4th and the engine feels to be making the most torque, if i put my foot into it as much possible before it down shifts , it gets slightly worse. Its hard to tell if the noise is there at hi rpm. This noise is kinda like a bearing or rattle/wobble noise?

     

    2nd today i was messing around with the truck and decided to rev it up in park, not to redline but a pretty good rev and it sounded like something was rattling around in the engine. I was at probably 2k and quickly revved to 4k, when the engine was un revving is when it made the noise. Any ideas?

     

     

    It seems to idle just fine and runs good, no noise at idle.

×
×
  • Create New...