Jump to content

juriha

Member
  • Posts

    789
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by juriha

  1. Hell no!! Not for silver finish!!! You can buy brand new chrome ss wheels for $900

    $600 tops with no tires, unless you find someone that absolutely has to have them and that doesnt care about getting ripped off... LOL!

     

    I'm talking OEM, not repro's...

  2. Started driving the truck daily a couple weeks ago with the nice weather...mods are in sig.

     

    Went to a shopping center, came out and left, on the way home CEL comes on.

     

    Pulled codes when I got home. PO0172 and PO0174...Fuel Banks 1 and 2 running lean...

     

    Cleaned MAF, checked all vacuum connections (replaced a vacuum cap that was dry rotted.)

     

    Reset codes, ran fine for a day then threw the same code again.

     

    AFR gauge reads between 14.5 and 15.3 during cruising, bottoms out at 10.0 whenever its in boost, and at idle in Park it will read 17-18.0 or max out AFR on lean side. A blip of the throttle will pull it down, then when it settles it maxes out again. Before this issue it would always be 14.3 during cruise, and 10.9 under boost, I've never seen AFR gauge go above 15, except when engine braking...

     

    I have read that a leaking intake gasket will cause lean conditions, but would it be all of a sudden? Motor only has 10k miles on it...highly doubt its intake gasket.

     

    Fuel pressure gauge reads 60psi constantly, so I feel like I can rule out fuel pump.

     

    At this point I am hoping maybe its just bad gas? I use the same station and pump religiously...truck has been problem free for over a year with the blower.

     

    I am looking for any kind of help to remedy this, let me know what you guys think.

     

     

  3. About 3 years ago I installed a Kenwood DDX-514 H/U with the Axxess GMOS-04 module.

     

    Problem: I'll be driving down the road, and the volume of the stereo will spike to full blast...I attempt to turn volume down on H/U, and it shows I am adjusting the volume but it does not adjust the volume. To get it to reset I have to pull over, shut off truck, and pull the fuse from under the hood. It will be fine for about 30 minutes then do it again. I double checked my wiring, bought a new Axxess box, and it still does it. I had the unit bench tested and they said it was fine, however they were not able to test it using the RCA ports...which the Axxess box utilizes for speaker output.
    Anyone have any ideas? I've googled my arse off trying to find similar issues...or upgrades from Kenwood to rememdy this to no avail...

    Note: I did put the stock H/U back in the truck and it works as expected with no volume issues...

    Any and all help is greatly appreciated. Thanks.


×
×
  • Create New...