Jesse 05ss

What about a tailgate and roll pan in one

my guess is 14.27 before and 13.98 after

Go with a TOYO proxy ST they are great

don't do what I did I went and put a 275 45 20 on the stock when had to replace the tires rode kinda hard but it looked sweet now I have custom 20's and i run 285 50 20 and they stick out a little not much like half an inch

I know you will probably all diss me this but I am going to be bagging my ss in the next couple years. do the guy in the video said there was a c notch dun to the front. I know ya c notch the back but do ya really have ti c notch the front to lay out the frame

do you still have the 65 lbs injectors and if so will they work for the stock 6.0

good I will be putting twin STS's on mind

Thanks I was thinking of pulling mind for a night in August for a really big car show and doing burn offs and showing off and stuff now I wont take it out thanks.

Who that makes me wonder what you all will say about mind when I start doing my body mods I am going to be putting the escalade front end conversion kit on it but it wont have the caddy grill it will be a strut grill then all shaved and lambo doors then smooth tale gate roll pan combo with the license plat in the tail gate angled off to the right and 89 caddy tail lights smaller sport mirrors. But this wont happen for like 10 to 12 months when it is payed off.

now my motor is stock except for the cat back and air raid cold air in take do I need to relocate the IAT and if so how hard is it to do or is this something I don't need to worry about

no

Ya can do what I am going to be doing to mind I am bagging it will be able to lay out the frame on 24'sbut when dun with the kit it will be close to $7000

that sucks that was like about 4 weeks ago on a monday they said we were being laid off for a week then tuesday they came down and laid off one hole shift over 40 people and there is still talk of laying 20 more off and I will be next to go I was the last to get to stay on. It sucks waking up every day and going to work not knowing if it will be your last the lumber market has gone down the tube. to give you an idea 2 1/2 years ago I bought 12 boards from work and it was 47.80 and today I can get them same 12 boards foe under 24 bucks well hope ya can keep your SS

All the all wheel drive SSS came stock with a 4.10 rear end and a rear locker

well mind did this and I took it to the chevy garage and there was something stuck that keep disengaging it when ya turned it on

thats kinda funny I need just one to got a flat at 60 and bent the bead of the rim

what do ya mean by moving the IAT sensor I don't know what that is. So if I have one it hasn't been moved and I am now close to 45,000 miles on motor

with the SSS already being lowered from the factory ya can only do a 2/2 drop

what about a loud squeal like a belt slipping if I am hard on the gas when it shifts from first to second it sounds like my belt squeals and I have had a new belt put on and also tried to use belt dressing for serpentine belts and still squeals

what about the bed/box ya doing anything with that need passenger side big dent in the top of mind 4 wheeler wheeled when loading it and slamed on the bed. and the lower rocker panel that runs from front fender to the box right under the doors driver side

What do ya need the rim or centre cap I have 4 good caps and 3 good rims got a flat and bent the bead of the rim while going 60 down the highway every thing is still in grate shape but that one rim

Work in a saw mill bad job right now

one way to tell with the 3.73 over the 4.10 the 3.73 shifts way smoother and the 4.10 is way snappy

nope mind is silver and all wheel drive

I have duel 40' series on mind and they stop right before the back tires and nothing out past that. so it goes headers cat pipe to mufflers and then nothing it's very loud with the stereo all the way up ya can hear the exhaust