Billybeer

GMpartsdirect wants $44.98 for shipping so they are $259.19 shipped unless in NC then add tax

Yea, I was a little disappointed in the clear, I have had clear anodization done before and it appear to be hit or miss on the shine depending on surface prep and type of anodization. I'm just going to have it painted to match the denali I think and polish the machined one and clear coated.

whoever changed it may have overfilled it, It is supposed to be 0 to 13 mm below the fill hole on the front diffs. Most people fill to the bottom of the fill hole so if it is un level when you fill it because of jacking or unlevel lift it could be high once on the ground and wick past the seal

Got mine, sorry for delay, I just got a new job and they are killing me with the hours, which is great b/c the pay sucks so I need the hours to make any bread at all.

Sick, What brand Rotors? What hawk pads? There are nine different pads by hawk for that application with different material and compounds? thanks

How about the radio/hvac housing? should look kind of like this

Can't find out if it has to be the same wheel, or if it has to be usable, that is why I think gm has no intention on giving the 50 back. He ordered a 22" alloy wheel yesterday for an escalade and it had no core on it. I have the feeling the stock it getting low on the ss wheels and they want to maximize the cash they get out of them. I have no problem letting them have the rim I have, it is missing a 3 inch long chunk along the rim. If they say no the rim has to be rebuild able I will just sell for scape. I mean the rim weighs 27 pound or something so that's so I might get a 20 spot but would much prefer $50 back.

Good luck,I've been looking and I was watching a set of used black one with the painted tire release cover, they looked perfect. I forgot about them they sold for 15 and some change the other day.. I currently have to tape my driver side one taped along the rear to hold it in. Passenger side is loose as well but stays in.

Bingo, he hooks me up every once in a while. But He could not find out if I return the rim with 3 inches of alum missing from going off road the other day would get me back my $50. Apparently GM does not plan on returning the core charge b/c he can't find out if there is even any criteria for the core charge, he and the parts guy called and no one seems to know. Does it just have to be a SS rim any condition or does it have to be workable? He does not want to take it see If it will be rejected and he either has to eat it or call me up and hit me up for $50 more. yea there is a set of used silvers that were then chromed for $1,520 shipped right now but I would rather pay $380 for one new painted factory rim, but at $430 it's ouch And as to the argument of keeping it unique that is not really a valid argument and does not hold up, if that was their plan why is there not a core on the skirts, fenders, cladding and all other ss unique parts.

I was looking to replace a damaged silver ss rim, I called my local dealer who I went to high school with and he came back and said there was a $50 core charge on that rim. That the Heck? What is up with that? Does anyone know the criteria of an acceptable core? Is Gm refinishing them or just trying to get an extra 50?

I was one of those but it must have jinxed myself. I had my driver front caliper fail the other day. The seal failed letting loose when I was braking causing me to swerve into a yard under hard braking, I pulled all the pads and the caliper that failed for rebuilding and bought new pads and ordered a re-build kit. I'm just trying to patch it until the new ZO6 brake brackets are up for sale, but I measured the old pads and there was about 1/4 " left and the new ones have about 9/16". So they still had alittle more than 1/2 material and about 1/8" till it hit the indicator. Fireman, You are right about the rotors, they are shredded. There is about 1/16" to 1/8 grove on both sided from the sweep of the pad to where it has not touched. 1/8 inch would more than probably put it out of spec for re-surfacing them.

money sent

well 24 people but 25 catchcans, 1/2 of where we needed.

How much less for the coil covers and the spacer picked up locally?

Do they come with that bracket? It is pictured on the page but not mentioned, i've had bad experience when it is not all spelled out. if bracket is included, pvc style from catchcans.com I'm in for 2 clear