-
Posts
75 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by sss25
-
-
I checked the fuses there all set I checked to see if there is power going to it and there is. The blinker and hazard lights work fine and they work off the same bulb as the brake light its just when I hit the brake the passenger side is out not sure what could be going on????
Carefully bend the tabs in the socket a little closer together with a flat head. That should fix the problem.
-
sick truck man i got a red 1 too and got the red n black theme going also except I only got the stock rims in black
-
i will have to reneg my frustration with ARH. i should have ordered 1 3/4 from the start. my bad. but they are sending me them for free. so i cant complain. and i have no patience what so ever. their customer service is absolutely amazing. they are great people. so dont take my nightmare header install as being their fault. no one is perfect and yes it does touch the frame. but they honestly have no idea why. they are gonna redo their template once i send mine back. i would absolutely recommend them. along with dynatech.
I recall a couple of ss members not being satisfied with their customer service. I guess they worked on it.
-
-
+1 on the pacesetters
Installed without a problem and noticed a big difference as with any longtube i assume.
-
You need one fwd and two of the last one. I got mine from transmissioncenter.net. On there it would be two of the 37p and one of the 37xp. I know as far as pinless accu pistons the 1-2 and 3-4 are the same but for the pinned accu pistons not sure if the 1-2 would be the same as the 3-4.
-
How about more cubes
-
The back looks real good and props on the hood
-
by wiring im assuming you mean that sorta mesh lookng screen. thats your maf sensor and deff. needs to stay in or you will throw a code and the truck wont run good
hook that maf sensor back up. Never heard of the intake either but let us know how it works out for you
-
Mr P wrote a very detailed post in the how to section Make sure you have a flathead screwdriver close by when it comes time to separate the cooked hose from the stock stat.
-
Shit i am doing mine tomarrow as soon as i get off work! what is Silver Deco/???????????
A deco is a type of paint marker.
-
If you decide to seperate the rst wing pm me
-
dudes got some major man boobs
-
-
I did mines silver with a deco and so far its held up pretty good. (Going on 6 months)
-
I've used a heat gun and a plastic scraper but i heard the eraser works great.
-
not sure of the mounting depth but i'm cutting the box where the subs magnet sit and then cutting out the bottom of the back seat and recessing the magnet through the top and into the seat then porting the box to give it plenty of air space, audio shop said there's no way to do it, i plan on proving them wrong
Ive been trying to figure out a way to setup my jl w6. The mounting depth is just too much to fit under the seat so it usually runs as a passenger in the back seat but your idea sounds good. Be sure to post up pics when your done.
-
thats the reason i didnt want to weld it. i dont plan on doing anything with them, but you never know. i wanted it more user friendly so to speak if i had to take them off or something. plus i heard its harder on the header bolts etc. when theyre welded in place
How about getting flanges welded on that way you can take them off easily if something comes up
-
Ah yes 1/4 tank just as when it was weighed. How about calculating for an awd. Since the pid shows rwhp would i be able to calculate awhp using the 68/32 split?
-
they are fairly close. it depends also on if you accurately put in the weight of your vehicle. if that value is OFF then the HP and TQ values will be off
Got it weighed about a month ago so truck weight is dead on. Thanks a lot
-
How accurate are the rwhp and torque numbers obtained when using EFILive? I was doing some logging and was just curious.
-
-
Inglewood, Ca .... 5 minutes away from lax airport.
-
1st item for sale is a 3" id turndown with clamp 18 shipped or 14 pick up.
2nd item is a single 3" (will double check the size) pipe to a fabbed y pipe with two slant cut 3.5" tips set up to exit out the back side by side. Starts at the muffler outlet. Was on my SSS for a total of 3 hours before i decided to dump the muffler. It has been sitting in the garage ever since. It is NOT mandrel bent. Make an offer. pick up only.
PM me for pics
Added A Pinstrip
in Video & Photography
Posted