musicbox210

Here she is...

2003 Silverado SS 6.0L AWD Automatic 144,197 miles. Grey Primered, fully Loaded (Leather, Cruise Control, Tilt, Motorized/Heated Seats, Mirrors fold, have LED arrow signals, and are also motorized; Bose speaker system with Sub woofer underneath center console, OnStar ready) This vehicle was very well maintained, garage kept, and not used as my daily driver. I also only use high performance Full Synthetic Royal Purple oil. I had big plans for this truck but need the money right now and honestly don’t have the time to do the things I want to do to it. Never had any major problems with it. Has over two thousand dollars in cosmetic modifications (listed below). Engine has never been touched/modified other than reg maint. Can use a brake job and freon (just haven’t had time to do it). No salvage title, however, I do have a lien on it. I still owe 5 on it. Title is yours as soon as I receive it from the bank. We can go together, I believe in good honest business. Serious inquiries only. SAN ANTONIO AREA WILL NOT PART OUT! Asking $12,500.00 OBO..........message me w inquiries... Modifications: $2,440 LED Interior Light Bulbs $65 Hood $550 Hood Latch Cover $45 BSER (Molded) Roll Pan $385 Rear License Plate LED Bulbs $20 Tailgate Security Cover $30 Front License Plate Mount $100 Viper Alarm/Auto Start Ignition $545 Differential Girdle/Cover $200 Fiberglass Tonneau Cover (not pictured) $500

Nice! Good choice of coating. I just used a 3M rubberized chassis coating they sold at Autozone/Advanced auto parts. I think it was about 7 bucks a can and I needed about 6. I could've put a heavier coating but I think it came out alright. Every little bit helps! Oh yeah and help with taking the bed off is a must. its easy to get it unbolted etc. (I don't know how much more difficult it would be with a bumper and spare since mine were both removed already due to a BSER roll pan) But, lifting it HIGH enough to clear the tire is what really sucks. Thanks to my bro n law, father n law and my wife haha we were able to do it

03 mass, yeah trust me i know how that snow salt and sand situation is...glad im not in UT any more. TallCanadian, its kinda hard do under the cab completely (i thought about it too-but that is a huge project in it self. so what i did instead was...... lifted the truck on jack stands and crawled underneath, spraying small pieces at at time that needed some additional protection. After all, the rubberized spray comes in an aerosol can so that's a plus also. Keep in mind the truck frame already has an oem coating so all you really need to do is add to some rough spots that might have gotten exposed. Thanks for the interest guys!

i didn't grind the rust off. I just took a paint scraper at it to knock off surface rust and debris. Because the frame already has a factory rubberized coating, I didn't want to scrape or grind all the way down to the metal. I wanted to salvage some of the factory coating, instead of having to do it ALL overs again.

Anyone have a bowtie?????? Still in need of one

got mine today too thanks!!!

2003 front grill OEM BOWTIE WANTED to paint THANKS!

thanx for the love guys

BOWTIE SOLD to... BlownFogger540

ok sorry for the delay ....guys who want the BOWTIE Sale is pending to Blownfogger...If he doesnt come through red04supersport was next up

HITCH COVER SOLD....to O2 WS6 TA

more pics of hitch cover

Up for sale are a few things I have no use for: TOW HOOKS came off my SSS, have no use for them. Was under my truck one day and noticed them, the bumper covers them anyway so took em off. Great condition 25$ shipped within the US. SOLD>>>>>HITCH COVER is brand new never used. Took off my bumper for a BSER Roll Pan 20$ shipped. SOLD>>>>>BOWTIE is used but in decent condition. Has minor scratches, nothing it wouldn't get with reg. use of your truck. Also, the Arrival blue is paint, NOT a sticker inlay. I painted it myself using the OEM paint code. 15$ shipped PAYMENT will be through paypal only. Please notify me if interested or if you have questions. After I confirm who wants what I will update with what is sold. Please DO NOT submit payment until I contact you back to verify. Thanks

more pics... of the under side of the bed

Well, as I took off the bed to primer...I went ahead and sprayed some rubberized protectant on the frame after noticing spots of rust and breaks in the original rubber coating. First, I scraped off any loose gunk from frame with a paint scraper then went at it. After taking the bed off, lifting it (with helpers), spraying it, etc. I saved the underside of the bed for another day.Therefore, without the help of others to lift the bed I thought of a way to do it alone, one side at a time. As you can see, I used a jack stand for supporting the bed and went at it with a decent bed liner. Didn;t want anything too expensive as this is just to protect the underside from rust etc. After being stationed in UT for 4 yrs i know how the weather, road salt etc can affect the under carriage. Now it's back in San Antonio loving the weather!

just sent payment...hope its not too late

F/S OEM Hitch. Took it off for a roll pan, have no use for it. If interested, make me an offer and give me your zip code so i can get you an ADDITIONAL price for shipping. Thanks! Questions call Andrew 210-544-1441 I have more pics if interested, let me know.

FS SS Logo Hitch Cover. I installed a roll pan and never used it. still in box and plastic sleeve. Make me an offer + $15 shipping. Thanks! Questions call andrew...210-544-1441

Still have it.....if anyone's interested

Just took off my bumper to mount my BSER Roll pan, here it goes..... Off of an 03 SSS Arrival Blue. Good condition, has some minor scratches and blemishes, nothing sanding, primer and paint can't cover. Overall, in great condition! All original parts. Along with bumper, you will get the spare tire (cable drop system), and all necessary bolts to mount it. Prefer local pick up...unless you're willing to cover the shipping costs. (keep in mind the dimensions and weight-it's pretty heavy) Make me an offer I'm in San Antonio TX zip 78212. If you are seriously interested and want more detailed pics let me know. Feel free to give me a call or txt if interested. Andrew 210-544-1441 Attached thumbnail(s)

A few more

Just took off my bumper to mount my BSER Roll pan, here it goes..... Off of an 03 SSS Arrival Blue. Good condition, has some minor scratches and blemishes, nothing sanding, primer and paint can't cover. Overall, in great condition! All original parts. Along with bumper, you will get the spare tire (cable drop system), and all necessary bolts to mount it. Prefer local pick up...unless you're willing to cover the shipping costs. (keep in mind the dimensions and weight-it's pretty heavy) Make me an offer I'm in San Antonio TX zip 78212. If you are seriously interested and want more detailed pics let me know. Feel free to give me a call or txt if interested. Andrew 210-544-1441

Up for sale is a used Undercover Tonneau Cover. Will fit Chevrolet Trucks 1999-2007 with 6.5 ft bed. Black, hard top, gas lifts, locks with key, rubber seals around all four edges, water proof interior, removes in under 5 min., can withstand over 175 lbs on top of cover, weighs about 58 lbs. Minor scratches to regular wear and tear, No holes or major gashes/scrapes. Well taken care of. Asking 450.00 OBO Call or Text Andrew 210-544-1441

Lookin to sell this blue SS logo hitch cover i purchased a few mo back. Still have the original packaging and box i received it with. I had another one that i used all the time and never got around to put this one on. Now, I'm taking off my hitch and bumper to mount my BSER Roll Pan....overall, i have no use for it. Asking...30 plus shipping (pending on location etc. If interested feel free to PM me or Call- 210-544-1441 Andrew another pic... Attached thumbnail(s)