SS-GTP
-
Posts
78 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by SS-GTP
-
-
Looking to see if it's something simple like a pressure switch, or low refrigerant before going to the pro's.
Here the situation - At idle the compressor stays engaged and I have a low side reading of 32 psi and a high side reading of 200 psi and the vent air is only blowing 80F (ambient was 90F).
Then get the rpm's up to 1500 rpm and the compressor starts to cycle. Low side gets to about 85 psi and the compressor kicks in and the pressure drops to about 25 psi. The high side cycles between 150 and 200 psi. Not that the vent air is ever very cold, but there is of course a slight difference between when it cycles on and off. The frequency of the cycling is probably near every 5 seconds.
I'm thinking that I'm low and I'm shutting down the compressor on the low side but wanted to get some feedback/confirmation.
Thanks
-
I'm curious as to how smooth the truck should turn when doing low speed turns in a parking lot with the steering wheel turned to near the lock? I get that gallopping feel that you typically get with a mechanical 4 wheel drive system or a failing ball joint. I raised the front end and all the ball joints felt tight. Maybe it's always been there, but I seem to be noticing it more in the last couple month.
3 gauge A pillar pod and two autometer gauges for sale
in For Sale/ Wanted
Posted
PM sent