Miller812

just a caddy front end. on the nnbs chevys they look good with caddy front end. love this truck. minus the gold rims this is awesome

sweeeeeet

when i get the gel film in im guna put it on the inside of the screen as well and see how it looks.

lol

couple of the radio. i asssure you they are not at all orange in person. added on to Jons (idahoblkss) led how to.

then i took the resistors and bent one side over and snipped almost all of it off, then took the led and cut the positive leg down to almost nothin. then i soldered them together to make them like this then desolder one bulb at a time and solder then new ones in. sorry i forgot to take a pic of the circuit board with my positive marks so i marked the rubber and took pics. positive is the side marked with a line make sure to keep the resistor close to the led otherwise it will hit when you puch the buttons. test the circuit board before putting it back together and make sure they all light up. this pic shows the difference with the blue condom over the stock bulbs. i did not put leds in the pwr button and the tune buttons just because it looks like it would have been a real big pita. so i got some transparent fabric for now until i can get some red gel film for them. then put it all back together and enjoy.

So in addition to Jons original post of how to's, here is the stock radio how to. start by taking out the stereo, gently pulling off the power button and the tune button, removing the faceplate from the whole radio. after you have the faceplate off, flip it over and take out these four little guys. take the circuit board out how it is sitting with the face down, otherwise all your buttons will fall out and you dont want that lol. after you get the circuit board off it will look like this. then you want to remove the audio button, gently pull it will pop off then take the clear plastic ring off followed by the cushin. take off the rubber cover and the blue condoms if youd like

this is pretty easy to do as long as you have a steady hand and time lol. there is a great thread on how to do this in the how to section. leds you can get off ebay. just make sure there from a us seller.

<br /><br /><br /> Couldn't have said it better Sent From My GNex

im going to have triple 7 redo my cluster in blue again and then ill probably change all leds to blue.

<br /><br /><br />I had them off to clean them and plasti them. See if I like them black or not. <br /><br /><br />I think I got them from stylingtrucks.com. They are AVS. Don't get the cheap ones off ebay they fade and warp. Sent From My GNex

theres bulbs burnt out in the cluster. all my leds are flat top 180degree leds

I have tinted LED tails also and love them. i dont know why but for headlights i love oem. i like most led tails out there tho

Here is a couple pics of my led install in my truck. I ordered blue and got red but i did them anyways and i actually really like the red now. thanks to Jon for the write up on this. makes it sooo much easier. This is wat i got done in about 5-6 hrs. will be doing more tomorow. guna start with the steering wheel controls and then maybe tackle the radio witch i here can be a big job by itslef. so stay tuned.

<br /><br /><br /> Yea leds are ricey. specially one led burns out witch one will, and then looks ghetto Sent From My GNex

dayum i love the jgp trucks. nice truck man

itd help your sale to tell wat brand. maybe some pics to

welcome. get some pics of your truck up

oh ya lol. there not there

the swap. my old truck and the new one

me??

better lol. is this approved by jddmj now lol

dang thats bad ass. looks like you painted them lol. looks awesome man. wish i lived down there

sweet thanks man. looks like ill be headin to walmart tonight to get some lol

why thank ya. i just called my girl and asked were the nail polish remover was and she said we didnt hav any. i was like wtf lol