JamesT_SS

This is awesome. I actually have been doing something similiar. I have an 06' and i got an 03' cowl induction hood with my donor truck, but like you, i like the honeycomb grille better. I am actually trying to adapt an entire 06' grille to the 03' hood. I prefer the split side extensions versus the solid ones on the 03-05. I will post my work on here as i go. I currently only have a cut version, as like you said, the 06-07 sticks forward about an inch to meet the extended hood. I cut that top section off to match the 03 grille. They are surprisingly similiar. The 03 grille will fit right under the overhang of the 06 hood. [/url] The donor grille is acting as a placeholder while i work on my 06' grille.

Awesome, thank you for the update. Hope it helps you out.

sorry the engine is spoken for already, just hasn't shipped yet.

Ok update, the cladding has all been spoken for. I've finally caught up with everyone's pm's and posts. If I missed you please pm me. It has been a very busy day. There is still a lot of stuff still available. I will update the original post list of items once those items are paid for. for those that reserved parts, please allow me a day or two to get the shipping info all worked out. i've got a long list i have to work through, but i will do my best to get everything out as fast as possible. i will pm those people with final price and such once i have it all. Also if we talked but nothing was reserved or spoken for that means that it is still available to others. don't worry, if i promised it to you i will not sell it to anyone else even if they out-buy you. Thanks again for all the interest.

"edited post" cladding pictures removed. All sold.

CarlsLQ9SS: sorry about that, I'm actually being inquired through pm for the exact same parts under jddmj, is that you? I need to post the cladding so you can see, as they have some rubber from burnouts on the bottom edge. Interior SS emblem $5. I do have interest in the cladding from multiple people so I will let you know. caddy03pimpin: $100 for engine harness, 75$ for ECM, because I don't have the software to change the vin.

I just realized I have a 5 message Private Message allotment, so I apologize for anyone that can't get through that way. I will try and keep up the best I can. My guestimation of what happened to this truck is that it was being used on the track (with nitrous) and somehow they bounced the front and rear corners off a wall, amazingly not damaging the whole side. Mileage most likely total-lossed it. Oldhabbit: I do have those two pieces. $10 for both, plus shipping? chevybowtie72: The rear bose speakers, $20 for both, plus shipping. No visors, they were pretty gross. SSmoothSilSS: Door skins are perfect. Cladding may not be included due to interest from other parties. Skins + guts only with no mirrors or interior trim= $75 a piece and I will have to calculate shipping...they are heavy. Possibly freight. Would you need the door handles? $65/ea without SSBlue24: Sorry they are sold already. 1BAD2K: as stated, I do not have the fillers, but I got mine off ebay for $30 as I had to get them for my truck. Turns out they don't always come on the truck. Part # 15197879 whytry85: If SSmoothSilSS does not want the door handles then yes. $10 each. kaze_v8: $75 for headers. They are not ceramic coated, but i would recommend you have them blasted and coated. They will be weld on, as they were not flanged. I cut right at the weld...the very very crappy weld. There is a possible interested buyer for the stall, fyi, but I'd say $100. Fair warning, mileage is not known, but it drove fine when i picked it up and the transmission fluid was pristine. I'd go to say it was installed with the relatively new transmission. Johnboy92: $20 for the door speaker (i have not removed it from the door yet, but priced assuming its in good condition). Overhead cubby, $5. I have to grab some pictures of it for you, but i believe it could use cleaned. I just want to double check nothing is cracked or broken. Pretty sure its sand colored. As stated, all prices do not include shipping. I will shoot you a PM for your zip code once I resolve some of the messages. I just realized I have a 5 message Private Message allotment, so I apologize for anyone that can't get through that way. I will try and keep up the best I can. My guestimation of what happened to this truck is that it was being used on the track (with nitrous) and somehow they bounced the front and rear corners off a wall, amazingly not damaging the whole side. Mileage most likely total-lossed it. Oldhabbit: I do have those two pieces. $10 for both, plus shipping? chevybowtie72: The rear bose speakers, $20 for both, plus shipping. No visors, they were pretty gross. SSmoothSilSS: Door skins are perfect. Cladding may not be included due to interest from other parties. Skins + guts only with no mirrors or interior trim= $75 a piece and I will have to calculate shipping...they are heavy. Possibly freight. Would you need the door handles? $65/ea without SSBlue24: Sorry they are sold already. 1BAD2K: as stated, I do not have the fillers, but I got mine off ebay for $30 as I had to get them for my truck. Turns out they don't always come on the truck. Part # 15197879 whytry85: If SSmoothSilSS does not want the door handles then yes. $10 each. kaze_v8: $75 for headers. They are not ceramic coated, but i would recommend you have them blasted and coated. They will be weld on, as they were not flanged. I cut right at the weld...the very very crappy weld. There is a possible interested buyer for the stall, fyi, but I'd say $100. Fair warning, mileage is not known, but it drove fine when i picked it up and the transmission fluid was pristine. I'd go to say it was installed with the relatively new transmission. Johnboy92: $20 for the door speaker (i have not removed it from the door yet, but priced assuming its in good condition). Overhead cubby, $5. I have to grab some pictures of it for you, but i believe it could use cleaned. I just want to double check nothing is cracked or broken. Pretty sure its sand colored. As stated, all prices do not include shipping. I will shoot you a PM for your zip code once I resolve some of the messages.

UPDATED: 21 August 2016 All sales are closed. Everything is gone. Thank you everyone who purchased parts.

Has anyone put a gloss black set of these on their SSS yet? Preferably with pictures. Or for that matter these: http://www.tbssowners.com/store/index.php?act=viewProd&productId=259 More importantly has anyone found out for certain if they will clear the Z06 calipers?

In my opinion the gloss black accents the red perfectly. Wet black powdercoat from a local powdercoater.

Any chance i can get one of these kits.