TravisB

It is the turbo only and most kits are for a t4 housing not a t6 this is a big turbo. Taylor Sims @dallasperformance spec'd it for me we were shooting for 800rwhp

I decided to go procharger on my truck motor project I have a used Garret turbo I need to sell. T6 housing large frame used but in great shape 76.6mm/106.7mm majpor, hot side83.8mm/96.5mm with a 1.08a/r will support 1,000hp 500.00 obo

AS the title say I have a set of upper and lower strong arms on my 99 silverado they have less than 1k miles on them. I also have a like new set of McGaughys 2" drop spindles for 17+ wheels same mileage http://www.ridetech.com/store/strongarms/?subcats=Y&features_hash=V287#pagination_contents retail on the arms alone is 1000.00/they were clearanced by air ride for a coil over as there arm for this truck was designed for use with a shockwave which could still be done. I would take 900.00 for all of it. The spindles do have new hubs in them and disc brakes of course I have no use for. I could ship the entire knee assembly or see seperatly

is this a ford friendly site? haha I have a bunch of build pics of the silverado getting coil over front and 3link coilo over rear with a watts but I am getting ready to pull it all out and go c6 front and rear.

I have 4 Ride tech coil overs for sale they have around 1k miles on them I am changing directions on my project and these shocks will be to long for my application. Retail they are 250.00 each will sell all four shipped for 600.00 with springs(750 front/300 rear) extended 18.625 stroke 6.9 compressed 12.325 They do require frame mods I cut the spring pocket off the front of my frame and used a shock as pictured below (non stud style) has a thru bolt eyelet top and bottom http://www.ridetech.com/store/coil-overs/ HQ series

thanks they are for sale... have about 1k miles on them. Im going 5 lug and cant use these anymore

I have a turbo I need to move not sure what youre looking for..... T6 T76 supports 1k

My name is Travis Ball I am from Fayetteville Arkansas I work full time as a claims rep for nationwide insurance and part time (nights/weekends) at www.kdhotrods.com My Project is a 99 GMC with a 06 Silverado front clip currently wearing lots of primer: ridetec upper and lower arms Drop spindles One off Boyd wheels ridetech front and rear single adjustable coilvers custom built 3 link rear suspension with watts link rear mounted stainless fuel cell its sitting around 6/9 drop now but it is currently completly blown apart I have plans for a custom chassis, 402 w/procharger, IFS/IRS, triple adjustable shocks, 4L80. I will start a build thread very soon looking forward to sharing my project and hopefully picking up some tips from those of you that have built these before. Also in the background is my lowered 2006 ford powerstroke on 24"semi's