-
Posts
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Guero005
-
-
Interested but yes pics please!
Sent from my SM-N900V using Tapatalk
-
Do you still have your lid? I jist picked one up and the gas struts that came with it are missing one bracket to where they mount to the lid and I'm also curious to see where you mounted the stuts to the truck do you have any pictures of the hardware installed?
-
-
Is the shiny spot around the whole drive shaft? I have a flip kit and c notch on mine and before I drove it I noticed there wasn't much room for clearance between the shaft and upper cross member. So I cut it out.
-
-
Interested in a set of blue how much?
-
Moog is what I purchased. Through oriellyys auto parts here in az. 462$ for all the parts I installed the ends and the bolts along with greased them but the idler and pitman arm I took to a shop so they did the labor for those along with the alignment. All that was another 340$. But yes you can say I got raped for sure. But glad the truck is fixed.All the those parts are only about $225 from amazon. That is for Moog parts. They must have raped you in labor charges.
-
Do you still have them?
-
Just fixed my shaking and wobbling over the weekend I replaced tie rods bolts and tie rod ends along with pitman and idler arms $800 later.
-
Ok sounds good thanks manUse 3m acrylic foam tape. It looks kinda black, not the light gray cap you can buy at the corner parts store. I would recommend some of the 3m adhesion promoter wipes they sell as well. Check with a body shop if you can't find any for sale.
-
The piece in the pic is already off my truck and at a shop getting fixed. This is the passenger side. But I did notice the drivers side was starting to come loose. What kind of 3m double sided tape should I use anybody have any recommendations? ?
-
Still have some available?Yeah i got plenty left.
For those that paid i shipped them out today.
-
-
Do you have passenger side front door cladding?
-
For the front? Yes it came with it but it wasn't on. But the front bumper had pre drilled holes so I threw it in to cover the holes and bought the ss plate later on.GUERO 005 DID YOUR TRUCK COME WITH THE LICENSE PLATE HOLDER? Also BLOWN SS/T do you have any anymore Silverado SS parts forsale? Thanks
Sent from my iPhone using Tapatalk
-
Got what your looking for. Rear bumper with both stepping pads in same color and spare tire access cover, and I believe it has the 2 upper mounting tabs as well I'd have to look at it. I really wanna keep a local sale but I have to local guys that have said they want it but I still got it at home. If your wanting to pay for the shipping and what not I'll ship it for you.
Do you have pictures of the rear bumper and how much are you willing to let it go for?
Sent from my iPhone using Tapatalk
-
I'm looking for a rear bumper cover along with mounting hardware if possible and also In need of passenger side front door cladding. Arrival blue would be awesome but if not that's ok. Thanks in advance!
Sent from my iPhone using Tapatalk
-
Also if you have any leads for a passenger door front cladding can you send them my way I'm in need of one.
Sent from my iPhone using Tapatalk
-
Do you still have the bumper along with the step pad? How much to ship to 85203
Sent from my iPhone using Tapatalk
-
eBay has a triple gauge pillar with tweeter hole cut out for I believe $37 is what I saw last it's by glowshft I believe part number is gs-371
Sent from my iPhone using Tapatalk
Great. Thanks for the info!
Your welcome hope that helps if it says it has ended go to glows gifts actual website and they should have it as well!
Sent from my iPhone using Tapatalk
-
Looking to buy a new trim piece for my drivers side A pillar. The tabs that hold the tweeter in are damaged, and the clips are worn out. If anyone has one up for grabs, let me know. Thanks.
Also looking for a 3 gauge pod for the A Pillar to replace my 2 gauge pod. Thanks.
eBay has a triple gauge pillar with tweeter hole cut out for I believe $37 is what I saw last it's by glowshft I believe part number is gs-371
Sent from my iPhone using Tapatalk
-
I had to make brackets. I used two small pieces of angle iron. Then mounted the angle to one of the bumper supports.
That's what I thought but did your housings for with that 90 degree support mount from the bumper to what looks like the radiator support
Sent from my iPhone using Tapatalk - now Free
-
Here is mine. Freshly dropped with the setup NorCal sells.
Looks good man. Hey how did you mount the fog lights in the brake ducts? I had recently bought some to install but wasn't sure how to install them.
Sent from my iPhone using Tapatalk - now Free
-
That converter would be a good choice.
Yeah that's what's I've heard so now I just need to find a full valve train kit as well and I should be set!!
Sent from my iPhone using Tapatalk - now Free
Door Sill Plates
in For Sale/ Wanted
Posted
Im super late but are these still available?