Guero005

Im super late but are these still available?

Interested but yes pics please! Sent from my SM-N900V using Tapatalk

Do you still have your lid? I jist picked one up and the gas struts that came with it are missing one bracket to where they mount to the lid and I'm also curious to see where you mounted the stuts to the truck do you have any pictures of the hardware installed?

Here's my 03 dropped on 4/6

Is the shiny spot around the whole drive shaft? I have a flip kit and c notch on mine and before I drove it I noticed there wasn't much room for clearance between the shaft and upper cross member. So I cut it out.

Email sent

Interested in a set of blue how much?

Moog is what I purchased. Through oriellyys auto parts here in az. 462$ for all the parts I installed the ends and the bolts along with greased them but the idler and pitman arm I took to a shop so they did the labor for those along with the alignment. All that was another 340$. But yes you can say I got raped for sure. But glad the truck is fixed.

Do you still have them?

Just fixed my shaking and wobbling over the weekend I replaced tie rods bolts and tie rod ends along with pitman and idler arms $800 later.

Ok sounds good thanks man

The piece in the pic is already off my truck and at a shop getting fixed. This is the passenger side. But I did notice the drivers side was starting to come loose. What kind of 3m double sided tape should I use anybody have any recommendations? ?

Still have some available?

Has anybody had this issue and how do you fix it. My passenger door cladding started coming loose and got caught on the front fender and is now cracked that is in the shop getting fixed but now my drivers side is starting to come loose and bind up how can I fix this??

Do you have passenger side front door cladding?

For the front? Yes it came with it but it wasn't on. But the front bumper had pre drilled holes so I threw it in to cover the holes and bought the ss plate later on. Sent from my iPhone using Tapatalk

Do you have pictures of the rear bumper and how much are you willing to let it go for? Sent from my iPhone using Tapatalk

I'm looking for a rear bumper cover along with mounting hardware if possible and also In need of passenger side front door cladding. Arrival blue would be awesome but if not that's ok. Thanks in advance! Sent from my iPhone using Tapatalk

Also if you have any leads for a passenger door front cladding can you send them my way I'm in need of one. Sent from my iPhone using Tapatalk

Do you still have the bumper along with the step pad? How much to ship to 85203 Sent from my iPhone using Tapatalk

Your welcome hope that helps if it says it has ended go to glows gifts actual website and they should have it as well! Sent from my iPhone using Tapatalk

eBay has a triple gauge pillar with tweeter hole cut out for I believe $37 is what I saw last it's by glowshft I believe part number is gs-371 Sent from my iPhone using Tapatalk

That's what I thought but did your housings for with that 90 degree support mount from the bumper to what looks like the radiator support Sent from my iPhone using Tapatalk - now Free

Looks good man. Hey how did you mount the fog lights in the brake ducts? I had recently bought some to install but wasn't sure how to install them. Sent from my iPhone using Tapatalk - now Free

Yeah that's what's I've heard so now I just need to find a full valve train kit as well and I should be set!! Sent from my iPhone using Tapatalk - now Free