SS_Medic03

Is that a hole in the wing by the pic that is what it looks like and that would make it harder to fix them minor scratches?

Still have any red ones? Still have any red ones?

Want to sell the wing to? I'm down if it's oem? It looks so in the pic what think

here's a video of her a ideal truck is running good thanks to John Kelley @ Kelley Performance would recommend him to anyone that need any work done to there ride.

extended the wires and got the wires all the way up to the fire wall to clean it all up

My new custom PCM bracket in an painted, made out of the passenger side corner bracket after relocating the battery to the HD battery tray spot EV6 adapters soldered in and all wires extended to fit clean and out of the way

So its been sometime since I have been on the site and thought it was time to do an update X-link bracket made and X-link installed manifold drilled, tapped, and lines hocked up Siemens 60lb injectors in, Holley rails on, and ls3 throttle body on got to love how big my RX monster can is look at it next to the cigarette box procharger race valve this thing is big and sounds sick

Intercooler pipe welded and started polished looking its coming out good

I took toilet paper and riped it in half and folded it down and pushed it in the holes then sprayed it with caliper paint.

It cool. I went out of town just got back and still waiting on some backorded part so I can get back to work on her

It's my mud toy 90 blazer stock 350 custom lifted about 20" or so siting on 46" military tires!!!

Painted some parts Procharger bracket Procharger brackets spacers Made front intercooler mount supports and welded them of aluminum. First time ever welding aluminum and doing it with a spool gun on a mig welder. Brackets painted and mounted Intercooler mounted Procharger and manifold put on for mockup of the intercooler piping

Sweet how u did the wires! Think im going to have to do the same on my truck. How did u run ur catch can back in to the manifold? Was thinking of tapping mine underneath the lid after the throtalbody. And what did u t off the brake booster to or is that for the boost gauge and BOV.

starting to get things in and starter to get some work done on the truck starting with some fueling used the stock fuel pump rubber support to help the aeromotive fuel pump fit nice so it don't move around a little mod to make it fit fuel pump all wired up and going back in Mounting the relay to the frame worked out great! Used the bolt that sticks through the frame for the stock fuel filter mount and there was a hole in the frame at just the right spot for the ground wire. Sanded it down and bolted it. wires routed up in to the engine bay but not connected at this time still waiting on some parts to start putting things back in

still have the fuel pump and the injectors

Ok so started to tear down the truck and I think I found out y my efans weren't working right the guy I bought the truck from or who he had install it did something wrong and for some reason the capacitor for the stereo was connected to it and he must of melted one of the relays and replaced it and part of the power wire was melted. If any one can tell me if these are the right relays and has any instructions or a diagram so I can install this the right way?

Thanks just realized the adaptor I got from summit was the wrong one Haven't looked at cams yet won't to get stage 1 of my build done so I can save up a litte more two do stage 2

hi guys looking for some help with my 03 Silverado SS AWD it is my DD has p1, core 2, dynatech headers, shift kit, 180 thermostat, 05 efan, so I have to get my p1 rebuilt and was thing of upgrading to a d1 in the process im also going to do some other upgrades in the process. An was wondering what u all think of the parts I have started to pick out and thinking of going with and what other parts are a must before I get it up and running again so going to do it in stages. Stage 1 is to get it up and running agin so if there's things I'm going to need I will take the help thanks all. Will update this main post as my build goes on and if there is more things I add to stage 1 of my upgrade. upgrades stage 1 Intercooler: Mishimoto Universal Intercooler S-Line, Black custom aluminum intercooler pipe welded by me Intake manifold: Holley EFI LS Hi-Ram Intake Manifolds 2bar map sensor adapter harness for map sensor Throttle body: ls3 intake x-link RX Monster Catch Can w/ Dual Check Valve Breather Oil Fill Cap Pinned Crank HD Tensioner New fuel injectors: siemens 60lb dekka injectors EV1 to EV6 adapters fuel pump: aeromotive 340lph racetronix fuel pump harness NGK TR6 spark plugs ARP head studs Turned by John at Kelley performance and a big thanks goes out to him for all the help he has been giving so far with things im going to need stage 2 rockers valve springs Cam stall Innovative overdrive 8 rib pulley Built 4l80 Pic to come as I do the build