everfife

Sounds like a bad temp sensor

Has the battery died lately? You might just need an idle relearn

Ok, so I have the XR275HR cam with LS6 yellow springs on L92 heads. I am installing 76mm@ 8lbs turbo(I know, not a good boost cam, but Im running with it). I just purchased the PRC 320s springs rated at .650 . When installing the springs, do I have to change anything as far as spring height? The LS6 spring height is 1.800 while the PRC are 1.810. These springs were recommended by another SS member. I see that the springs are rated 144lb @ 1.810 closed and I cant seem to find the LS6 spring specs. Any information is appreciated

I went with PRC 320 Double Springs I thought I could tackle this job myself, but after reading about finding valve height, shimming, etc I might have a profession do it. Im a valve body guy, not heads lol. If it was as simple as a spring swap I could do it

So, I finally decided to boost my truck. I am going to run it on my current cam,Comp Cams XR275HR .566/.568 Lift-222/224 Duration 112 LSA. Not the best cam for boost, but Comp Cam says it will work with my 76mm turbo, running a max of 12lbs of boost. My question is, I have GM LS6 yellow springs currently with max lift specs of .580 . Should I replace my springs with the double springs? If so, is it necessary to replace the keepers and spring retainers? If its not necessary, Id like to save the $450. Thanks for your input in advance

Orders are being shipped from my facility today. Thank you for your orders and expect your packages by next week due to the holidays.

They are very similar

The order of the Red projectors get shipped this coming Monday. All of you who have made a preorder, expect to receive your tracking number next week!

Thank you

Blue ones are on my next order. I am waiting for those as well. I got the red ones first because everyone on the fb silveradoss group wanted red. FYI everyone, the pre-order sale is ending soon. Get the discounted price of $35.00 while it last. Once the sale ends the price is $55

3 weeks

I lost a bid on ebay last week for a whipple s/c im keeping an eye out. Whats your price range?

You can pay now, its cheaper or later when the order comes in which is approx 3 weeks

Thanks buddy, but I am saying theyre for SS Silverado on the forums and facebook. The auction is for the posts I make. Not a big deal is Joe whoever gets on ebay and tries to search for them. And yes, I posted on the fb silveradoss group as well. They are super bright led projectors

Hey everyone, custom made Red SS flood lights are in the making. Available for pre order of $35. 10 days for pre order price increases to $55 afterward. Get while supplies last. All of the details are included on my ebay sale here: http://m.ebay.com/itm/261652810972?_mwBanner=1 If enough orders are made for the red SS flood lights, I will make an order for other colors. I have to order 50 sets of one color. Thanks for your support to make this product cheap as possible

Picture of my truck with new shoes

Thanks for the info Josh! When I looked up the number I was coming up with Bosch and 3 different types. For a while I thought there was an injector issue but fixed the problem with a dry rotted hose.

I've been trying to figure out what injectors are in this truck. I looked up the numbers and it comes up with 3 different options. Tried getting in touch with zippy since Hitch guy said it had his tune, but can never get in touch with zip

Stoshball, tell Tom I said props on the great truck. For a while, the other guy was trying to take credit for Toms build. I figured he didn't have anything to do with the build based on his answers to my questions. I pm ' ed Tom, but I know he hasn't been active since 2012. I take great care with this truck. It will not see winter! BlueAWDSS: where you located?

Found the previous owner! Member Profile: 1bad70monte Name: Tom He was last active Oct 2012. The guy who bought the truck from him found me on Facebook. His profile is: hitchc21 . I was asking questions about the type of injectors, what heads are on it, etc and he finally told me he didnt do anything to it. He sent me a link to what 1bad70monte did to it. http://www.silveradoss.com/forums/topic/76708-headscam-2004-arrival-blue-ss-in-michigan/?do=findComment&comment=854169 Here is a list of what I have: Modifications and New Parts: Engine/Exhaust/Cooling: Comp Cams XR275HR Camshaft-Specs .566/.568 Lift-222/224 Duration 112 LSA New GM L92 Cylinder Heads and Rocker Arms GM MLS Head Gaskets with New Head Bolts LS3 Sodium Filled One Piece Intake Valves GM LS6 Yellow Valve Springs High Volume Oil Pump Comp Cams One Piece Hardened Pushrods New GMPP Lifters New GMPP Timing Chain New L92 Truck Intake Manifold and New GM 90mm Throttle Body All other Engine Gaskets and Seals (GM) Casper Chrome Valve Cover Breather Volant Cold Air Intake AEM Bruteforce Ceramic Coated Long Tube Headers Catless Midpipes True Dual Pipes back to 2 Flowmaster 40 Series Mufflers with Side Exit in Front of Tire HPM 7000 CFM Electric Fan Kit (uses OEM PCM Control-Very Nice Fit) New AC Delco Water Pump SLP 160 F Thermostat MSD 8.5 Plug Wires and DEI Wire Covers NGK TR6 Spark Plugs New GM Oil Cooler Lines New Radiator Hoses New Primary 02 Sensors New Delco Remy 145 Amp Upgraded Alternator New Belt Tensioner, Both Belts and Idler Pulley Transmission: Finish Line Transmission L5+ 4L65E 5 Pinion Planetaries Billet Output Shaft Shift Kit and Reworked Valve Body Lots of other Goodies-Check their Web Site Circle D Specialties Billet Multidisk 3200-3400 RPM Stall Converter Truecool 40K GVW Transmission Cooler (dropped Trans Temp 40F!) New GM Transmission Cooler Lines Suspension/Brakes: McGaugheys 2 inch Front Drop Spindles McGaugheys 3 inch Rear Drop Hangers and Shackles SSBC 14 inch Drilled and Slotted Rotor Kit (all four wheels) Painted Calipers (Blue) Energy Suspension Poly Front Sway Bar Endlinks Additional Mods and New Parts: New OEM Chrome SS Wheels Shopman Billet SS Grille Bowtie Truxedo LowPro Tonneau Cover Heavy Duty Bedmat Dual A Pillar Gauge Pod Aeroforce Interceptor Scan Gauge (Engine Data and Performance Monitor) Autometer White Faced Electric Fuel Pressure Gauge Walbro 255 LPH Intank Fuel Pump Optima Red Top Battery New RF ABS Wheel Speed Sensor Custom Covercraft Car Cover for Indoor Winter Storage

Just an update, I found a dry rotted hose, that I believe goes to the fuel pressure regulator. I also read a post talking about the Walbro 255 fuel pump that I have installed. They were talking about how the pump doesnt like anything less than a 1/4 tank. So far, knock on wood, my truck has been running flawless. Weird, but either the hose or pump was acting up causing my truck to studder/misfire. Any thoughts of what might have caused this? Shortly after my last post, I finally got a code which was an injector code. I cleared it, fixed the hose and havent let the truck lower than a 1/4 tank.

Rob777, your truck started sputtering? I have the Walbro 255 pump and lately my truck has been doing the same thing. I am showing 60 psi on my Guage. Let me tell you, one huge headache over this. It's intermittent. Will work fine one minute, the next it's sputtering like I dropped a cylinder. I'm not getting any codes either

Well, just got a P 200 injector code. Hooked it up to the tech 2 and ran a cyl injector test. Both 4 and 5 bank aren't working. Could this be a tuning issue? Like I somehow messed the tune up by removing the battery? Now I'm stuck as this is my dd. Did a light test and the computer is commanding the injectors

I might be able to find d something. Through research, I found who's truck I have. Everything about my truck http://www.silveradoss.com/forums/topic/76708-headscam-2004-arrival-blue-ss-in-michigan/ I'm thinking it might be a sticky injector. I got the numbers off of it but it comes up with 3 different kinds of injectors. Apparently it has a zippy tune on it

No codes