bmills1977

Looking at it, everything you said seems to be right on, bracket would have to be about 3/8 inch thick and you would have to remove some of the spindle to leave room for the caliber mounting hardware. Suppose it could be made out of steel or a sandwiched bracket could be used for extra strength. But your bracket and z06 caliber seem to be the best option. I have to come to terms with not being able to do what I want. thanks again.

I know the fronts wont. The bolt pattern is different, narrower. not sure about offset. The Ss uses the same 14 mm bolt, but the mounting hole distance is narrower 5-1/16"ish. That is for the front anyway. Not sure about the rears, ill check tomorrow. I was really hoping they would just bolt up, but nothing I want is ever easy. When you say you had them mocked up but went a different route, why so?

Hello, I joined this forum for the sole purpose of finding out more about these brackets. I hope I don't ask a question that has already been asked, been reading through the posts and don't see my question answered. I REALLY want to used Camaro SS brakes not Z06 brakes, I like the idea of brakes made for a heavier car, and the brembo name doesn't hurt either. Also have a 07 Tahoe not a Silverado SS. Will the brackets work for the 2010 Camaro SS brembos? And will the brackets even work on the Tahoe. If so I'm buying. If not gonna have to make my own locally. Thanks in advance for your work on these brackets and my questions.