2004gibbstruck

Not an SS truck, but i live outside of Duluth. Planning on going to Car Craft if schedules allow. Saturday only though.

I'm planning on doing this conversion too. It seems like the WCCH deal would be foolproof,right? Are all 90mm throttle bodies the same? The reason i ask is because i'm looking at one from an 08 escalade and wanted to make sure it would work.

Sorry about that. Most glass shops (commercial, resedential and auto)carry C R Laurence catalogs. The last one i ordered was $175.00 it WAS NOT the power slider though.

Try these guys. they ship anywhere and any local glass shop could do the install http://www.crlaurence.com/ProductPages/E/E...56.html?Origin=

I don't have any specific tire pics right now. I'll post up a rear view later. They work surprisingly good in the snow too.

Ive been running Falken Ziex S/TZ04. http://www.sears.com/shc/s/p_10153_12605_0...sName=All+Tires I get Sears gift cards through work (safety program) and they match discount tire for $139.00 a piece.You can also get 305/50/20. I've had them two years now.They hold up well

I have the stock size belt on mine with the 3.2 pulley.It seems ok (no slip).I'm running a dayco belt though. The goodyear one is what i'm going to do with mine too.

Mine dynoed around 325-330 (can't remember exactly)with the stock wheel a couple of years ago. I have the 5.3 auto also. That was at 5psi also. Stock they are rated @395 HP

SOLD

pm sent

here are some pictures http://s125.photobucket.com/albums/p46/200...nt=P2010256.jpg http://s125.photobucket.com/albums/p46/200...nt=P2010257.jpg

I figured i would see if anybody here was interested in the leftover pieces from my cold air kit. i have the radix on my truck and have no use for the extra pieces of the kit. SOLD

PM sent in case other deal falls through.

I had to buy a new one from GM. I had already replaced two separate carriers in the 10 bolt already. The driveshaft and all lines bolted right up. i did have to get a different rear u-joint though.

The 08 vortec max has discs. I had the swap done on my 04 truck two months ago.everything bolted up. I got the 4:10 gears too.