-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 2004gibbstruck
-
-
I'm planning on doing this conversion too.
It seems like the WCCH deal would be foolproof,right?
Are all 90mm throttle bodies the same?
The reason i ask is because i'm looking at one from an 08 escalade and wanted to make sure it would work.
-
Sorry about that. Most glass shops (commercial, resedential and auto)carry C R Laurence catalogs. The last one i ordered was $175.00 it WAS NOT the power slider though.
-
Try these guys. they ship anywhere and any local glass shop could do the install
http://www.crlaurence.com/ProductPages/E/E...56.html?Origin=
-
I don't have any specific tire pics right now. I'll post up a rear view later. They work surprisingly good in the snow too.
-
Ive been running Falken Ziex S/TZ04.
http://www.sears.com/shc/s/p_10153_12605_0...sName=All+Tires
I get Sears gift cards through work (safety program) and they match discount tire for $139.00 a piece.You can also get 305/50/20. I've had them two years now.They hold up well
-
I have the stock size belt on mine with the 3.2 pulley.It seems ok (no slip).I'm running a dayco belt though. The goodyear one is what i'm going to do with mine too.
-
Mine dynoed around 325-330 (can't remember exactly)with the stock wheel a couple of years ago. I have the 5.3 auto also. That was at 5psi also.
Stock they are rated @395 HP
-
SOLD
-
pm sent
-
-
I figured i would see if anybody here was interested in the leftover pieces from my cold air kit. i have the radix on my truck and have no use for the extra pieces of the kit.
SOLD
-
PM sent in case other deal falls through.
-
I had to buy a new one from GM. I had already replaced two separate carriers in the 10 bolt already.
The driveshaft and all lines bolted right up. i did have to get a different rear u-joint though.
-
The 08 vortec max has discs. I had the swap done on my 04 truck two months ago.everything bolted up. I got the 4:10 gears too.
-
I just did the 14 bolt swap on my 04.I think I have everything you would need. Contact me if you're interested. I have the cross drilled and slotted baer rotors too
-
Sold.
-
PM sent
-
The rear axle went out in my truck again,now i'm looking at going with the 14 bolt from a 2wd SS or VHO.
Anybody have the part number for the whole assembly?
I tried searching but came up empty.
-
-
I would be interested in the roll pan and tips.
PM sent.
-
Still available?
PM sent
-
pm sent
-
PM sent
-
I'll take the belt. PM me payment information (paypal or money order).
Thanks!
Any One From Minnesota?
in Events, Gatherings, & Rallys
Posted
Not an SS truck, but i live outside of Duluth. Planning on going to Car Craft if schedules allow. Saturday only though.