Time2Kill

LQ9 DROP OUTS FOR SALE! INCLUDES ALTERNATOR, POWER STEERING, WATER PUMP, CRANK PULLEY ETC, WIRING, PCM, BASICALLY A TURNKEY MOTOR 2005 LQ9, 36,705 Miles: $2400 2004 LQ9, 59,000 Miles, $2200 2003 LQ9, 23,000 Miles, $2300 You can add a 4WD 4L65E for $725 I have no problem freighting these. Please include a zipcode for freight and also whether it will be going to a business that can unload it or if you will be doing a pickup at the local freight depot. I can have these shipped to your house, but it cost an extra ~75 to 100 more.

I have a red one from an '04 SS for $18 shipped. Still need to get it painted but a little bit cheaper that buying new from the dealer. Let me know

I have a set of stock rear bose speakers. $15 shipped for one, or $25 shipped for the pair. Let me know

It's on ebay: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...195415&rd=1 This auction is for a 2004 Chevrolet Silverado SS with 55,551 miles. The truck is black in color, with dark pewter/charcoal interior. The truck also has the optional chrome 20” rims. The SS version of the Silverado is equipped with the 6.0L HO V8 producing 345hp and the 4L65e 4 speed automatic transmission. The truck features AWD with 4.10 gears. The vehicle does have a Michigan salvage title. The vehicle sustained damage to the passenger side front corner. When we received the truck, the lower a-arm was broken at the ball joint, because of this during the accident the passenger side front wheel made contact with the lower front corner of the cab. (See pictures below) We have since replaced the passenger side lower a-arm and knuckle. The truck now lot drives. The exterior of the truck is in good condition; however it does have a few dings, scratches and small dents around the truck. The interior is very good condition with very little wear on seats. There is some damage to the upper dash pad on the passenger side. The rearview mirror was damaged in the accident and the gel from inside the mirror leaked onto the dash pad. The chrome wheels are in excellent condition, however there are only three rims, as one was damaged in the accident. The spare tire is now currently on the truck. As mentioned earlier the truck does start and lot drives, everything mechanically works as it should with no problem, even the A/C. Some of the items the truck will need is a driver side airbag, the front windshield, the radiator support along with the radiator (it still holds coolant but the upper mounting tab is broken), front bumper, grill, headlights, bumper and passenger side front fender. With some bolt on body parts and some work to the passenger side lower front of the cab this truck could be easily fixed. Please contact us with any questions or if you would like to see any more pictures.

That's odd. My converter did the exact same thing, metal to metal on the lockup clutch. Yet he claims he has never seen this before? Talking to a couple transmission shops, this has become a common problem for Yank, except they refuse to admit to it. You're extremely lucky you got away with only $500 in damages, it destroyed my $3,000 trans from FLT and cost about $2,000 to get the trans rebuilt. The clutch material plugged up a couple of valves in the transmission and fried just about everything, with less than 200 miles on the complete setup.

The AWD SS transfer case is about 2" shorter than most other GM 4x4 Transfer cases.

Schram auto hasn't had any Silverado SS trucks in a long long time. I've cleared out most of their inventory already And when they do have them in, they usually do not separate the cladding from the truck body parts.

I have one, looks practically brand new. $100 + s/h Let me know

I've had several Yank converters blow up on shop vehicles here, and got nothing but lies from Yank. Horrible service when their parts fail. I suggest staying far far away from the company. Definitely go with a Vig converter. We had one of Yanks converters blow up in a brand new stage 5 FLT trans with less than 100 miles on the combo, $3,000 out of the window just like that.

If anyone needs cladding, please PM me. I have quite a few pieces left from several trucks I have parted out

Attached are pictures of the cladding.

I'll be sending pics in a few minutes. Bump!

I have an excellent condition steering wheel with the controls. $70 shipped to your door via UPS ground. Let me know

I have the red tailgate cladding left from a truck I parted out awhile ago. Figured somebody on here could use it. It's in excellent condition ready to be put back on a truck. This is the lower strip that is on the tailgate, not the spoiler. $55 + s/h

$25 shipped to FL. Can take paypal.

Sure do, $35 shipped Only one of them did and it has yellow paint on all over it. It would need to be buffed/polished. Sorry, don't have one.

All of the bed cladding is still available and the driver side fender and cab corner are also available. I also have the rockers still.

Pictures of the seats have been uploaded to: www.eadperformance.com/1017

It's the entire rear door except for the interior door panel and cladding.

SOLD!

I have a set of Ported 317 heads for sale. They were ported by Absolute Speed. They have a dual Crane spring in them, good for about .625 lift. The chambers are currently at 69.8cc Asking $800 for them. The flow specs are: Lift: Intake: Exhast .200: 150: 122 .300: 203: 171 .400: 253: 208 .450: 274: 217 .500: 292: 222 .550: 303: 228 .600: 310: 234 I just got the heads back from ET Heads. They went through them and made sure everything was ok. They cleaned them, replaced all the valve seals, did a clean up pass on the deck so the deck is perfect, and verified the springs are still holding good pressure. These heads will be a great choice for anyone wanting to do a good head/cam swap and they are ready to be bolted on.

Link now works to look at the pictures.

No passenger door panel. The rubber mat is going with the center console.I can do the temp sensor for $15 shipped. Located in Ray, MI 48096. No, I might have one next week though.

I have a black rear bumper that has a small hole in it. Can easily be repaired by any shop. Let me know

Ray, MI 48096 We can arrange shipping if needed