AnAmerican Revolution

It was my work truck. that i purchased. I wont get fired. It just kinda sucks though. My cousin came and picked me up at the police station and we went to look at the truck theres not a straight piece on it, i lost my cell phone in the wreck or i would take pictures. i blew a .149 in the breathalizer so im really screwed i think im getting a dui out of it which is gonna suck, but i deserve it

Well people, this past weekend I was fishing with a few buddys. The night before we had been drinking pretty heavy. We all went to bed around 4 am. We woke up around 9 am and hit the road to go fishing. I was bullshiting with my buddy who was in my truck the other two where behind me in their truck. Anyways I was bullshiting with my buddy when I noticed i was off the road a bit and in the gravel. I go to get back on the black top and it went into a slide and I over counter steered and plopped it on its side. We went about 30 to 40 feet on the side of the truck before it came to a rest. Well I went to call a tow truck but a state cop happened to drive by at the very moment. he had me blow in the breath alizer, I was screwed right there and then. I feel kinda shitty because i could have hurt or killed my best friend

they better not cancelle the SQUIZZ or ill be pissed

I just got the truck back from the alignment shop. $300 to get her repaired. Needed ball joints, tie rod ends, and Then he told me the worst. I snapped a pin in the rearend and it cause the one axel to slide in further so now its dog tracked, I think thats the term they use. I bent a Rim which kinda sucks but im over it now. I know someone that ahs been asking me to buy the same rims I have on y truck for a month now. anyways. Bumper should be in thursday, as well as the new grill, and mirror.

well, its pullin like a SOB to the right and i know i need tires because i blew the belts on two of them. And i bent a tie rod, and im probably gonna hve the ball joints replaced for safe measurments. It just really sucks it had to happen the first night i had the SS out all year. The guy wasnt even pissed about his yard and it was tore up pretty bad, He asked me if I was drinking. Thank God I wasnt. Also it kinda worked out that i wrecked in his yard, He has a wrecker so I got a tow home which was like 35 minutes away from my house for $20. I already found a bumper and and a mirror on ebay. Tonight after work im gonna unbolt he motor mounts and lift the engine and pull the pan and put the moroso pan ive been planning on putting on for a long time, on tonight. It just seems like when i finally get ahead a little in life, something bad has to happen and smack me right in the face. I dont know, Guess i should start putting around like an old man from now on when im in the truck

My advice would be to is wait. There is not really good way to do it, I wouldnt even tig it. Besides I thought brass had to be brazed, I didnt think you could weld brass i thought it would just ball the tungsten when tig welding

Well, I was driving to pick up a friend tonight, first night to have the SS on the road all year. I was going around a skight turn when I started to slide on some gravel, so I counter steered (sp). Thought i had it under control. WRONG! It came back around on me and i slid about 10 feet and got some what straight and (WHAMM) right into a ditch. The truck jumped about 5 feet in the air after hiting the ditch went through some guys side yard smacked a tree with the mirror. Came to rest about 75 yards into the guys yard. The guy cam running out asking me if I was okay. I said yeah. He said he seen the whole thing. I look under the truck and oil is just pouring out of the oil pan. The oil pan is no big deal, I got an extra one sitting in the garage, but now I need it to get realigned (sp) and a front bumper, a passanger side mirror and the front plastic piece that goes on the bottom bumper. Anyone know of any good shops in PA. Also how does a 4 wheel alignment cost these days.

I was driving the company truck back to work when i looked over and seen an extremely clean red SS, stocker rims, but nice tinted windows and it might of had an exhaust. Just wondering if it was anyone on here

I was driving the company truck back to work when i looked over and seen an extremely clean red SS, stocker rims, but nice tinted windows and it might of had an exhaust. Just wondering if it was anyone on here

I was driving the company truck back to work when i looked over and seen an extremely clean red SS, stocker rims, but nice tinted windows and it might of had an exhaust. Just wondering if it was anyone on here

you are very lucky, i wish i could quit chewing, i go through a can of copenhagen snuff a day some times a can and a half depends on how long i work i use to spit very little, and in high school i use to swallow it. I have tried to quit on several occasions but havnt beeen able to quit for longer than a week

Id jump on it like a hobo on a ham sandwich

I use to work with a guy who was part of the KKK back when I was in highschool. He was one mean son of a bitch. He liked me, we got along no problems. He asked me to join. I said No thank you, I dont share the same beliefs as you. He was cool about it. Then a couple weeks later, An African American driving truck dropped off some shit at work. When I got to work after school the boss said he wanted to talk to me. Turns out he beat the hell out of the guy and put him in the hospital. Now his ass is sitting in jail for 25 years

sweet, looks good man.

well i took the gun shooting today. I think I am sending it into springfield, It shoots good groups at 25 yards but its having a feeding problem. Everytime it goes to put another bullet intot he chamber it kickes the bullet sideways and jams the gun. It kinda pisses me off because if you pay that much money for a gun it should freaking work everytime you pull that damn trigger.

Oh okay, thank you. You all just name a Time and place you want to shoot and I will start the old chevy up and be there. We could go at a place nearby me. It has an indoor shooting ranger an outdoor 1100 yard range a couple out door pistol ranges, Its the Ridgway Rifle club, they hold national shoots there every year. You all just let me know and ill arange to have some guests come to the range with me

barrel length is 3 inchesif that helps at all

Anyways Since, I enjoy shooting so much i decided to buy a springfield Micro Compact in the .45 caliber, Only problem is I am having problems finding a holster for it. I am kinda new to pistols are holsters supose to fit extremely snug or what, any help would be app.

Where i work we make windshields and rops for them we also make back windows, The top is made of aluminum then ,Line-x'd black the front windhsield is lexan(sp) we cut that on the water jet they turn out pretty cool, ill have to post a pic when we get another one in the shop

Almost forgot I love to shoot.

I enjoy golfing, swimming, welding and fab, wood working, and reading

I would like my name on the decal list as well, ill even snap a pic of it on my truck

I am glad the truck went to a person who really needs it.

wow

sucks about the rim but might I ask why did you send them the center cap off the rim