Jump to content

—Bauker™—

Member
 View Profile  See their activity

  • Posts

    276

  • Joined

  • Last visited

 Content Type 

Posts posted by —Bauker™—

  1. It’s Been A While!

    in General SS

    Posted

    Hey guys, I know it’s been 2-3 years since I’ve posted but I used to have a ’06 SS with 200shot nitrous, h&c, 6 piston baer brakes, all the basic bolt-ons. I miss it quite a bit and wish I had never sold it. I sold it for something a little more mobile and economical, as that is what it called for at the time. I picked up a Mazdaspeed3; fun little car not to mention it ran 13.7s out of the box. Traded that and now I’m rolling a ’09 Z06 with some goodies. Anyway, I’m interested in picking up another truck! While this may not relate to the SS forum, I do believe that you guys are some of the most knowledgeable people when it comes to the different engines available, plus, I just like the forum. So without further ado -

     

    I’m looking to pick up a 2009/10 Reg. Cab, standard bed Silverado in a 5.3L or 4.8L. My question is: Does anyone know if the engine RPO codes have changed, and if so what to? I remember the LQ4 and LQ9, and I think the 5.3 was like LM7 or LR4.

     

    2ND: Id like to find the engine specifications for the 2009 engines. Chevrolet seems to have taken them down from their site; things like bore, stroke, engine rpo codes.

     

    3RD: Any difference in auto transmissions between the 4.8 and 5.3? What are they using these days? What are they good for horsepower wise? I realize sooner or later Ill have to upgrade to a 4l80e but I'm just wondering what the stock limitations are.

     

    My intent, if you're wondering, is to put some of my old Silverado parts and Z06 parts to good use.

     

     

    Your help is much appreciated!

  2. FS: Stuff forsale.

    in For Sale/ Wanted

    Posted

    Genx 1 kit NIB 275.00 shipped. Normally 349.00+s/h (no purge on this kit)

     

    NX bottle opener NIB 200.00 shipped. Normally 239.00+s/h

     

    HID 9006 (low beams) kit. McCulloch kit. 12,000k. NEW. 275.00 shipped. Normally 339.99+s/h from www.xenonking.com

     

    1pc MAFS nitrous kit w/ 10lb bottle (normal wear on the bottle). Used for aprox. 6 months, extra jetting included. Probably should replace the o-rings on the solenoids or just send them in to NX, they'll do it for free on this kit. Normally 830.00 from NX. 450.00shipped.

     

    Quite a few people on here can vouch for me from my past sales on here, or you can do a search. Let me know if you want anything because this stuff will be going on ebay and craigslist soon.

     

    Thanks,

    Bauker

  4. Opinions on how much I should sell my truck for?

    in SSs & VHOs Only

    Posted

    It would be borderline too high if it had half the miles. 25K is extremely high for an '06. It's not even AWD. I only paid $27,500.00 for my '03 when it was only 3 months old with only 3K miles and it was loaded AND AWD!!

    Which is horrible resale. Call me crazy but the owners of these vehicles control the market. The cars have shitty resale because the people who have owned them sell them for nothing; mostly because they don’t know any better, they’re uneducated, or hard up for cash. This is typical of most GM owners. I could go on for hours about the system and statistics, but I won’t. Most places like Kelly blue book attain their info from auto auctions, whether it is repo auctions or whatever. Is that a system you would like to base the value of your car by?

     

    Time is not a concern for me, so I figured Id price it competitively (accounting for mileage, but not the modifications) with those found on autotader and ebay. I buy and sell vehicles by at least two a year, and I personally never use kbb to tell me what a vehicle is worth. I don’t expect to sell it to anyone here either. And before anyone flames me about controlling the market, take the supra for instance. GM would have great resale if it wasn’t for the people who own them. Remember that when you go to sell your car.

  10. FS: Nitrous Express GM 1pc MAF System w/ 10lb bottle

    in For Sale/ Wanted

    Posted

    I might take you up on this? What do you think installation would cost????//

    Do it yourself, it's easy. I left the connectorson there and quick connects, just find the ground on the driver side of the block, and the + right next to it. Next, wire up the WOT switch by tapping into the correct TB wire, then run a switch to the interior and a + 12 source and ground. Done. It's like 7 wires total, I believe. Cutting the MAFS in half is already done and included. Getting through the firewall and routing/mounting the nitrous tank/line will be more time consuming.

     

     

    I wouldn’t leave this in anyone else’s hands, you need to take it to get dyno tuned with a wideband, to figure out which jetting is correct so that you don't run lean. Someone who installs this won’t care and just use it to verify it works, not knowing what kind of damage they’re doing.

  12. FS: Nitrous Express GM 1pc MAF System w/ 10lb bottle

    in For Sale/ Wanted

    Posted

    Used it for about 6 months. Adjustable from 35-200shot. I'm selling it with the MAFS installed, all you have to do is swap them. The bottle has normal usage wear from the brackets, otherwise the kit is in great condition. It also has the programmable WOT switch. Sells for 830.00 on NX website. On a 150shot I made 440rwhp/585rwtq.

     

     

    Here's the kit. Had a lot of fun taking out Vettes and Bentley GTs. :driving:

    http://www.shopatron.com/product/product_i...9410.9718.0.0.0

     

    500.00

    bump. Doesn't get any cheaper dollar/hp.

  15. FS: Nitrous Express GM 1pc MAF System w/ 10lb bottle

    in For Sale/ Wanted

    Posted · Edited by —Bauker™— (see edit history)

    Used it for about 6 months. Adjustable from 35-200shot. I'm selling it with the MAFS installed, all you have to do is swap them. The bottle has normal usage wear from the brackets, otherwise the kit is in great condition. It also has the programmable WOT switch. Sells for 830.00 on NX website. On a 150shot I made 440rwhp/585rwtq.

     

     

    Here's the kit. Had a lot of fun taking out Vettes and Bentley GTs. :driving:

    http://www.shopatron.com/product/product_i...9410.9718.0.0.0

     

    500.00

  17. WHEELS FOR SALE, ARIZONA

    in For Sale/ Wanted

    Posted

    22 inch bonspeed laguna with nitto 420s these rims are bad 2pc percision cut billet, slight nicks on some of the wheels can get filled and smoothed to look perfect. billet on black could easily be painted whatever to match any truck

    with tires paid like 4000 something dollars at discount tire trying to get 2000 cash 602 - 390 - 1067 if ur intrested tires are like 85% these wheels are made to order so you have to get them like 10 months in advance if you order them at a store. im in pheonix area will deliver but not too far

     

     

    http://uswheel.com/bonspeed/bonspeed.html

     

    scroll down and check laguna can send pics of them on my truck if wanted

    kthxbai

    You wouldn't happen to live off of Dynamite/cavecreek rd area would ya?

  20. Opinions on how much I should sell my truck for?

    in SSs & VHOs Only

    Posted

    From the looks of it I should be asking somewhere in the neighborhood of 27,500.00 for it, private party... At least that's what Edmunds and Auto trader are telling me. Id like to get 28 for it but I wanted to check with a more knowledgeable bunch.

     

     

    '06 SSS, 25k miles, black, leather, bose, xm/am/fm/6 disc, Onstar, steering wheel controls, intimidator wing, bed rug, HID head lamps, corsa exhaust, tint, towing package, new tires, regularly waxed.

     

    Thanks guys,

    Rick

  23. FS: Baer 6 piston (6S kit) and Baer disc conversion rears

    in For Sale/ Wanted

    Posted · Edited by —Bauker™— (see edit history)

    -Fronts are 6S calipers (RED) with the largest rotor possible (drilled and slotted and zinc coated), I believe they're 15" but Ill have to check. Used for about 15,000 miles. Still have about 75% life left on the pad.

     

    The rear kit (RED), is a drum to disc conversion kit for the '06 (not sure what other years this will work for, call baer if you would like to know), has never been installed, perfect condition. I just never had time to install them. The rotors are cross drilled/ slotted/ zinc coated as well, and the largest avalible.

     

    Ill pay s/h and Ill throw in new front pads (220.00) incase there are those of you who think the old one's are "too used".

     

    Only reason I'm selling them is because I finally decided what car I'm buying and it's time to part out my truck.

     

    PM me if you're interested. First person I can make a deal with, gets them. I will leave a PENDING and SOLD post when the deal final.

  24. FS: [Feeler] Baer 6 piston fronts and rear kit

    in For Sale/ Wanted

    Posted

    Still available guys. Just looking for a car before I decide to let them go. Been looking at old school muscle now, something I can put a modern engine in.  :cool: Good Guys car show is this weekend so Ill keep ya updated.  :thumbs:

     

    reply to your PMs? :happysad:

    Sorry about that guys. I just bought a new house and it has just been crazy. Painters, landscapers, electricians, alarm people. People are breaking my shit left and right. I’ve had one window replaced 3 times now, 2 coffee tables, 2 irrigation controllers, and a fish that wont eat his goddamn food.

     

    Everyone, check your PMs. If you didn't get a message, I never got one from you so please resend. Thanks.

×
×
  • Create New...