Jump to content

supersub

Member
 View Profile  See their activity

  • Posts

    1,043

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by supersub

  4. Wtb: Gen 1 Small Block Chevy

    in For Sale/ Wanted

    Posted

    I have a deal for you, an entire turn key set-up! GMpp front serp drive kit w/ ac, 355 full forged, main studded,882 full port roller rocked heads, edel thermul coated rpm intake, headers 750 holly vac sec, petronx dist,msd wired, 450 pump gas with the ability to spray, with a fresh built 700r behind it over 7000.00 vested..........2500.00 takes it. all

     

    lmk

  6. Tvs 2300 Hits 714 Rwhp / 700 Rwtq

    in Forced Induction and Nitrous

    Posted · Edited by supersub (see edit history)

    great job Ray! The truck is a beast! All your time and effort is really paying off, and all the little tweaks that you have come up with along the way are paying off. Now when do i get to see her go down the track!

     

    It went 12.4 only using part trottle first and every bit of second......to the 1000' and then..... no third??

     

    youtube 12 second suburban its the first run and i swear i left like i was @ stop light as if a cop was next to me lol!

     

     

    the Lsx Was bought as a block only, the entire combo was picked by me with a lot of member feed back and built baised on a tvs 2300 was on it a year before it was avail.

     

    Its hard to believe it but since i have calmed down and started studying the graphs, tune and other issues

    there is still more on tap, so stay tuned.

     

     

    Ray

  9. Awd 60ft's

    in Strip

    Posted

    Hmmm. I dont get any kind of traction in 2wd.... And currently in 4wd leaving under any type of throttle all 4 go up in smoke, leaving of idle has netted me 1.81-85 consistantly. I am working on a completely new line of shocks to hold the front down and limit the rear squat. 4 new wheels and drag radials are on the get list as well, my intention is to leave harder getting traction and getting 1.6 or lower 60's. Only time will tell......

     

    go back to awd or a selectable 4wd is my opinion .

  11. Tvs 2300 Hits 714 Rwhp / 700 Rwtq

    in Forced Induction and Nitrous

    Posted

    Awesome!!! It sounds freakin wicked :cheers:

     

    What does your fuel system consist of?

     

    Sorry missed this post.

     

    I have an 03 it came with a return style system along with being a factory equipped flex fuel vehicle, the pump has been confirmed to offer at least a 30% increase in flow.

     

    New cobrajet 80# injectors and a magnavolt is the only thing changed from the original factory set-up.

     

    Trust me! it is done! LPA has been working with me on a set of twin in tank pumps.

     

    at the end of this dyno pull AFR's were starting to lean out.

     

    Ray

  12. Wow Ufc Robbery

    in Off-Topic/General

    Posted

    My statement was not an agreement with what happened by any means...I was just stating all fighters understand they DO NOT want to leave it in the hands of a judge because crap like this can / will happen but its also not the UFC's fault..The judging commity is like the refs...They work for all the promotions not just UFC.

     

    I could not agree more with this statment.

     

    Bad decision on behalf of the judges, Not the UFC.

     

    It sucks too.

  17. New Upgrades For The Supersub

    in Forced Induction and Nitrous

    Posted · Edited by supersub (see edit history)

    way to think outside the box Ray.... and I am with Krambo - make some! It appears that since you have created more internal volume your boost psi will drop... yes? I missed that day on fluid dynamics...

     

    Thx! for all the positive feedback guy's. Could not multi qoute all these so i picked i feel a great question and mystery to me....

     

    Internal volume? Yep! i would agree..... And actually thought i would see it right @ start up. But after several conversations, I agree with this.

     

    What if? the Blower in its originally designed state intercooler pressing down on the lower manifold absorbing internal heat along with heated compressed air coming out of the blower forced to make an imeadiate 90* turn upon exiting the intercooler, Forced into the intake port (which happens to be higher then the exit point of the intercooler) at a givin valve opening time become backed up in the rotor creating even more restrictive heat which in turn would be less dense air????

     

    Sorry for the run on sentence......... Brain typing thru fingers.

     

    No what if?? Now everything attached to the upper manifold(everything but the lower tub) Is isolated from the engine heat(to an extent) Being 50* BTW, also suspended above the intake ports, allowing the compressed air to travel thru the intercooler and into the ports more fluidly(is that a word?) but you know what i mean creating a denser cooler charge.

     

     

    Think of the New ZR1 they position the blower in the lower valley and push air up thru the intercooler then mcdonald's arch down to the intake ports. That even has more open space than mine started from strait from maggie. Magnuson designed these blowers to fit under the hood of a lot of vehicles, I figure if i have the room why not try and use it!

     

    So far i am seeing less heat and No apperent loss of boost.

     

    Please comment I look forward to any feedback.

     

    Ray

     

    My head room all gone: Still fits under the hood.

    CIMG2766.jpg

  18. New Upgrades For The Supersub

    in Forced Induction and Nitrous

    Posted

    thx guy's! pulling out the stops sorta speak. dyno day is coming soon and looking for that 7++ rwhp number, thinkinout the box I hope helps.

     

    this thing is proving well so far in several key area's, increased transistion for the air to flow creating less friction, fuel rails are no longer heat soaked, boost is like yesterday quick! And best of all E-85!!!!

  20. New Upgrades For The Supersub

    in Forced Induction and Nitrous

    Posted

    Being in Vegas taught me a few hard lessons! It's HOT!

     

    Both Me and the bus had a rough time! I felt that for the surrounding circumstances, Knowing that i had to drive it back to MN, the Suburban Finish with a strong footprint on my over HP goals. The Guy's AT LEP are truly Stellar!

     

    Well Now on to the heat issue, Vegas 110+ :bomb:

    what a day to dyno! :cry: Every body wants More HP out of there set-up Right!!!Well here is what I came up with!

     

    The words "Phenolic" and "Spacer".

     

    check out the vid!

    th_CIMG2781.jpg

     

    thats just the differance between the two manifolds.

     

    "Heat Soak" No more.

     

    CIMG2689.jpg

    Going at it head over heals and ending up hitting a home run!

    In my mind (at least)creating a " Velocity" effect creating more room for the air to enter the Intake ports.

    CIMG2696.jpg

    this also allows me to add E-85 to the mix utilizing the new larger Taller Injectors!

     

    Oh! Almost forgot Iat's hmmmm. :hail:

     

    Respond at your own risk!

     

    Can some one tell me what 205kpa = in boost? :hmmm:

     

    :burnout:

  25. 4l80 Question

    in AWD, Differential, & Transmission Tech

    Posted

    WOW! WTF! Now to the OP A newer tranny from an LS powered truck/van would be a better start. IMO the 96 4l80 is a good price, i would shop around.

     

    Danny you should have been a little more explanitory on your Opinion especially if you are a vendor(new or not) and well versed in tranny's, Vince was just tryin to read your mind for others to understand.

     

    I did not see the ad(sig) in question.(Not cool from the sound of it.

×
×
  • Create New...