The Breeze
-
Posts
69 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by The Breeze
-
-
I am looking for Siemens / Mototron 60lb injectors.
-
Yeah thats damn fast
-
Sorry to hear about youre truck. Good luck getting it all straitened out.
-
I have one set also, will sell them at dealer cost.
Zippy Im intrested in a set of SS emblems how much + shipping to 21784.
Thak you, Bryan
-
performancetrucks.net and i talked to him over there and he said he'd come over here and make an appearance.
http://www.performancetrucks.net/forums/sh...ad.php?t=385886
-
very nice there is definatly a cowl hood in my future.
-
Thanks all its has taken a long time to get the truck like this everything is so damn expensive but worth it in the long run. I hope to have it runnin roughly 11.7 or .6s by the fall the 11.9 is without meth + I have the 90mm t/b conversion kit on the way then I have alot of tuneing to again it seems I am never done tuneing the truck.
-
here is a vid a freind made of us at the track.
http://www.performancetrucks.net/forums/sh...ad.php?t=396323
-
I hear you there, but it would be on the radix...
Check this site out. Lookat hot specials.
-
That looks killer how about a pic of the under side of the hood. And who makes it.
-
I run a gates belt part# k061110 but I have the 100m Idlers so that may change it a lil bit but yeah I would shorten it up a little bit if yuo didnt from the maggie supplied belt that maybe the problem with the tensioner its probably bottoming out and just snapping try putting the belt on at the auto parts store parking lot and they should let you bring them back in until you find the one you like mine has just enough slack to get it on good luck on getting the problem straitened out.
-
try napa part #38131 change the pulley with the dayco tensioner and it bolts right up looks a lot beefier just put mine on so i guess i will find out . i went thru 4 dayco tensioners
Yep my Napa tensioner is still holding up fine I dont know why you all keep buying the stock maggie junk. Did any of you go to Ft Lauderdale high I graduated there in 83.
-
Yeah that is a damn nice Truck
-
Check this one out I got from Napa.
The part No# is 38131 Its definitly alot beefeir than the one Magnacharger sends with there kit.
-
Pm Sent
-
Thats the goodmark hood in youre sig correct im intrested in one also depending on price.
-
Bid placed I hope I get em.
-
That is still damn good I hope I can get half that with the Cam and Dyno tune to put me into the 11s
-
The cam helped take me from a 13.37 to a 12.57
Damn just a cam swap got ya .8 tenths.
-
Is anyone here runnin this cam with the Radix S/C if so how much did it knock off youre 1/4 mile E/t? I know it idles like stock and is great for a daily driver thanks in advance for any input.
-
Can't you use the old pulley that you allready have. Ooops sorry I did'nt see that it got trashed also.
-
-
No. Can someone let us know when these will be sent out?
-
I just ordered mine on 8/26 so I really am not expecting it yet but now I am starting to wonder
Thunder In Burgh 2006
in Video & Photography
Posted
I love whoopin up on trailer queens. Good job.