GmRob6.0

Nice, this is like what I pulled my LT-4 out of. Very good fit in my 97 WS6 used a TPIS cam with an A4 and bolt-on's the dam thing runs 12.20's all day long in full trim. I think most LT-4's only had the 6speed and don't think I know of any other year the LT-4 was put out other than a few f-body's that SLP did. Rob.

TTT

Anyone know of or have a good set of 20" wheels for a 06 1/2 4WD with about 5.5 or less back spacing. Something in a 9.0" to 10" wide. Must be chrome. Need pics and pricing I will pay for shipping if need to, must be willing to neg. Thanks, Rob.

payment sent. Rob

I may be looking for one. Do we have part numbers so I can call and find out if they can flash the prog. for use on the 06/6.0?

Just checking if anyone has or knows of anyone with a set of 20" wheels for a 1/2 ton 4x4 lifted truck with or with out tires. My set of Welds have a good set of 295/70/17 thinking they are about 34". The wheels have normal wear and If I remember correct I think one of them did have some flaked off chrome on the back side only. No problems with any of the wheels. I would also be open to pay up for the 20s depending on what you may have. I am in the DFW area so if anyone in the area wants to look at the wheels it would work out good. I have pics ready to send. thanks, Rob

PM,sent.

PM sent.

truck looks good w/the Denali wheels. My 06 V-Max is almost identical to yours on the out side, I went with the CC. and did the 4-6in lift and Weld Renegades w/295 on mine. Do you have any other pics of the truck. I have been looking at going w/different wheels.

Well I don't think I want to take the cheap way out if it comes to it I would go with the Corsa or the new Borla setup both are stainless steel setups pluss most of all don't want to have to cut it out because of int, noise. Not looking for max flow just looking for an improvement over what is on it now. Thinking the SS should have a higher flowing muffler/cats? My last truck 02 Denali 6.0 I went with a cheap Dual setup and it did help hp wise but bad mistake, cab wise.

Want to use a stock 06 SS muffler as an upgrade to a 06 V-Max 4WD CC. Question is are these the same? I know the V-max is a S.Steel system and they are both dual/in dual/out. Dont know about the SS but the V-Max sure is quiet even under load. Does anyone have any insight on this topic? thanks, Rob.

I would like to see what you can come up with? For both shirt/cap. Rob. <{POST_SNAPBACK}> I would be looking for the black/white combo.

I would like to see what you can come up with? For both shirt/cap. Rob.