RacerJJ Posted February 14, 2005 Report Share Posted February 14, 2005 I was thinking about running Drag Radials on all 4 corners on a stock Silverado wheel so I don't mess up my new 22's while at the track (also beginning to have minor traction problems, believe it or not). Will they clear the calipers and rotors? TIA. Link to comment Share on other sites More sharing options...
fordsareslow Posted February 14, 2005 Report Share Posted February 14, 2005 I don't actually own a ss, but from what I have read on this iste, I think 17's are as small as you can go, could be wrong though Link to comment Share on other sites More sharing options...
xxjiggaxx Posted February 14, 2005 Report Share Posted February 14, 2005 They should fit. (the spare is a 16") I think people with the mcgaughys kit can't go smaller than 17" Correct me if i'm wrong. Link to comment Share on other sites More sharing options...
2bseen Posted February 14, 2005 Report Share Posted February 14, 2005 If it is factory the 16s will work but if you have spindles you have to run 18s or bigger. Link to comment Share on other sites More sharing options...
Krambo Posted February 14, 2005 Report Share Posted February 14, 2005 I ran a 16" 99-02 silverado wheel for a bit. Looks tight but it fits. Link to comment Share on other sites More sharing options...
adams2003 Posted February 14, 2005 Report Share Posted February 14, 2005 16's will work fine. I used to use 16's on my truck for racing before I dropped it. Link to comment Share on other sites More sharing options...
CraigW Posted February 19, 2005 Report Share Posted February 19, 2005 Use stock suburban 16" wheels in winter with no problem as long as the tires are the same circumference. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.