yorgog Posted March 4, 2005 Report Share Posted March 4, 2005 I want to get the Bellteck lowing kit for my Truck. The only problem is that I do not want to give up my Hotchkis sway bars. Is it possible to do this. I heard that they can support up to a 2 inch drop. Is that accurate. Also will I have to get shorter bump stops if I do this and will my truck have a tendency of bottoming out. I live in New England the roads arent that great. Link to comment Share on other sites More sharing options...
TBSS Posted March 4, 2005 Report Share Posted March 4, 2005 You will likely need shorter end links ("dog bones"). Call Hotchkis and tell them your situation, they will likely be able to help you. Link to comment Share on other sites More sharing options...
Plwtwo Posted March 4, 2005 Report Share Posted March 4, 2005 You can take the factory rubber bump stops and cut them down a little...they work better then the Beltech urethane ones. I cut the top two humps out just enough left so you don't hit metal to metal. And you'll probably need to get Hotchkis to send you shorter dog bones...... Link to comment Share on other sites More sharing options...
RollinSSHard Posted April 1, 2005 Report Share Posted April 1, 2005 YES! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.