dros44 Posted March 15, 2005 Report Share Posted March 15, 2005 I was looking into getting a stoker kit for my truck and am proably gonna do it over the summer. Does any one have any information for me about what the best parts would be to buy, where to buy them, and how I would get the most amount of HP out of this. If it means anything I have TOG headers, a corsa sport exhaust, VOlant CAI, and a PCM for less tune. Link to comment Share on other sites More sharing options...
2bseen Posted March 15, 2005 Report Share Posted March 15, 2005 mine just came in last week, it is eagle forged crank, callies rods, and mahle coated pistons. I ordered mine from www.gen3performance.net Link to comment Share on other sites More sharing options...
TurbochargedBerserker Posted March 15, 2005 Report Share Posted March 15, 2005 I went with callies crank and rods and diamond pistons. All my info is in the modifcations topic. Link to comment Share on other sites More sharing options...
dros44 Posted March 15, 2005 Author Report Share Posted March 15, 2005 Do you know how much HP you are putting to the wheels after u did the Kit. Link to comment Share on other sites More sharing options...
matt rem Posted March 15, 2005 Report Share Posted March 15, 2005 A stroker kit involves a whole engine rebuild, seems like alot of work for a truck with just those mods. Link to comment Share on other sites More sharing options...
haul@ss Posted March 15, 2005 Report Share Posted March 15, 2005 A stroker kit involves a whole engine rebuild, seems like alot of work for a truck with just those mods. <{POST_SNAPBACK}> gotta start somewhere.... haha u plan on gettin a 408 or what? either way good luck Link to comment Share on other sites More sharing options...
matt rem Posted March 15, 2005 Report Share Posted March 15, 2005 Right now I am getting a set of heads for the SS and a TB converter. Then I think it is done. It will be my daily driver. Next is a RCSB 2wd with a 408 and a 4 link rear. Link to comment Share on other sites More sharing options...
dros44 Posted March 15, 2005 Author Report Share Posted March 15, 2005 just those mods? well what else should i do first E fans? Im gonna do tthe engine rebuild, get a new trans, torque converter, and then to top it off a Vortech intercooled s/c Link to comment Share on other sites More sharing options...
matt rem Posted March 15, 2005 Report Share Posted March 15, 2005 Your going to need alot more than just a stroker kit. You are going to need a built trans, converter, cam, more than likely injectors,fuel pump for them. It just seems like alot of work are you doing it yourself? Link to comment Share on other sites More sharing options...
dros44 Posted March 15, 2005 Author Report Share Posted March 15, 2005 the vortech comes with the fuel pumps and al of that and if u read what i just wrote i said a trans and a converter Link to comment Share on other sites More sharing options...
matt rem Posted March 15, 2005 Report Share Posted March 15, 2005 Good luck to you, just asked a question. Me and bigbl62 are going top meet up tommorrow to check out each others trucks at the Monmouth Mall if you are interested. Link to comment Share on other sites More sharing options...
dros44 Posted March 15, 2005 Author Report Share Posted March 15, 2005 i would love to i really wanna talk to another SS owner. But im back in school in NEPA. thanks alot for the offer though. and sorry for getting snappy. Link to comment Share on other sites More sharing options...
matt rem Posted March 15, 2005 Report Share Posted March 15, 2005 Its cool. You should be hooked up with that setup. Just takes alot of planning, I would talk to Erik or Ben they both have been though it. I am thinking of it just not in the SS. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.