BenKey Posted May 8, 2005 Report Share Posted May 8, 2005 Not sure if there is any advantage, other than a larger pipe for the fuel to flow once it hits the manifold area, but has anyone thought of going to a billet set? You larger cubes/FI guys? Like something similar to the FAST setup Bigtex was selling? I am in the process of cleaning up my stock intake and getting all the oil out of it that my motor sucked up into it and installing SVO 42s. The stock fuel rail just looks so cheesy. Billet rails with braided fuel line connecting the two with anodized connectors would look sweet. Hadn't figured out the part about connecting them to the stock lines. I'll have to do some more research there. Link to comment Share on other sites More sharing options...
TurbochargedBerserker Posted May 8, 2005 Report Share Posted May 8, 2005 I looked into an aeromotive set, but I couldn't find any that would take the stock regulator. I was also told that the fuel lines are more of a restriction. Link to comment Share on other sites More sharing options...
99Silver5.3 Posted May 9, 2005 Report Share Posted May 9, 2005 Nasty Performance makes a direct replacment rail for our trucks. Look pretty killer too! Link to comment Share on other sites More sharing options...
BenKey Posted May 9, 2005 Author Report Share Posted May 9, 2005 Nasty Performance makes a direct replacment rail for our trucks. Look pretty killer too! <{POST_SNAPBACK}> Thanks for that. I went to their site. I didn't see a pic of the truck setup, but they did say that their systems will connect right up to the stock lines. Do you have any pics of someone who's gotten them? Erik, they had some decent priced valve covers on there. They didn't look too bad. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.