SURF Posted June 17, 2005 Report Share Posted June 17, 2005 I need to know how you take the trim off the side of your truck with out chipping or messing up the paint. my truck looks just like this one with the same trim http://www.truckworld.com/Truck-Tests/99-s...-silverado2.jpg Link to comment Share on other sites More sharing options...
fordsareslow Posted June 17, 2005 Report Share Posted June 17, 2005 I used a heat gun, and some goo gone. Link to comment Share on other sites More sharing options...
1stdodge Posted June 17, 2005 Report Share Posted June 17, 2005 just pull them off with your hand and then use goo gone or something else and a plastic razor blade to remove the adhesive. It will be easier if you let the truck sit in the sun for a while. Link to comment Share on other sites More sharing options...
SURF Posted June 17, 2005 Author Report Share Posted June 17, 2005 What is goo gone and where do you get it? Link to comment Share on other sites More sharing options...
SURF Posted June 17, 2005 Author Report Share Posted June 17, 2005 Here are some pics of my truck http://tinypic.com/63yhd2 http://tinypic.com/63yjaq Link to comment Share on other sites More sharing options...
jchitwo Posted June 17, 2005 Report Share Posted June 17, 2005 What is goo gone and where do you get it? <{POST_SNAPBACK}> You can find it at about any store, walmart, or supermarket next to the desolveit. Link to comment Share on other sites More sharing options...
smooth68 Posted June 17, 2005 Report Share Posted June 17, 2005 I had real good luck going down to my local part house and picking up some 3M general adhesive remover - REALLY removed the sticky remains fast and automotive safe. You can see where I did my tailgate in the view vehicle section. Link to comment Share on other sites More sharing options...
tawss04 Posted June 17, 2005 Report Share Posted June 17, 2005 3M makes a wheel that goes on the end of a drill and looks like a big eraser and will take off the adhesive without damaging the paint. Works great and is esay on the hands. Link to comment Share on other sites More sharing options...
Slvdossdude87 Posted June 18, 2005 Report Share Posted June 18, 2005 nice ride SURF what year is it? right now im driving a '00 1500 z71. your wheels are awesome! Link to comment Share on other sites More sharing options...
SSilverad03 Posted June 18, 2005 Report Share Posted June 18, 2005 3M makes a wheel that goes on the end of a drill and looks like a big eraser and will take off the adhesive without damaging the paint. Works great and is esay on the hands. <{POST_SNAPBACK}> Been there done that. I was a little sceptical about it but actually it turned out fine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.