.justin. Posted November 17, 2005 Report Share Posted November 17, 2005 Hey guys I'm kind of cuirous about the injectors that were on the radix kit when I purchased it used. If anyone has a chance, can you jot down the numbers printed on the back of one of them? I found the passenger side, front injector was rather easy to read. Mine state: 1143A 25176861 Thanks Link to comment Share on other sites More sharing options...
GIjay Posted November 17, 2005 Report Share Posted November 17, 2005 I have had mine on for about 3 weeks. Ordered it new. I pulled off the 1st injector on drivers side and turned it around. I got... 81648 17113739 hope that helps Justin Link to comment Share on other sites More sharing options...
BenKey Posted November 18, 2005 Report Share Posted November 18, 2005 If you want to order, go to racetronix.com or Arizona Speed and Marine. They list the part no. on their websites, which doesn't match either of the ones posted. Here is the racetronix link: Multec II Link to comment Share on other sites More sharing options...
.justin. Posted November 18, 2005 Author Report Share Posted November 18, 2005 If you want to order, go to racetronix.com or Arizona Speed and Marine. They list the part no. on their websites, which doesn't match either of the ones posted. Here is the racetronix link: Multec II <{POST_SNAPBACK}> Thanks for the link. Responses on the EFI Live forum have convinced me that the P/N listed on the back of the injector is not the important one I really just want to know with certainty what injectors are in there. My VE table values are extremely high doing the WBO2 autotune with Flashscan, and they would almost seem perfect if I adjusted me IFR back down to stock from the ~5.0 the values are sitting at right now. Link to comment Share on other sites More sharing options...
BenKey Posted November 18, 2005 Report Share Posted November 18, 2005 For 42lb injectors it should 5.2. Pretty sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.