smokum73 Posted May 7, 2006 Report Share Posted May 7, 2006 What is the stock line pressure on our transmissions? thanks for any help. Link to comment Share on other sites More sharing options...
.justin. Posted May 7, 2006 Report Share Posted May 7, 2006 What is the stock line pressure on our transmissions? thanks for any help. <{POST_SNAPBACK}> Depends on how much torque is being delivered to the trans. Anywhere from 0PSI base up to 90PSI. Link to comment Share on other sites More sharing options...
smokum73 Posted May 7, 2006 Author Report Share Posted May 7, 2006 I was using HPTuners to reprogram my PCMForLess tune and the base had been set at 136, and the recommended max is 96 and I was just a little confused/worried. Link to comment Share on other sites More sharing options...
.justin. Posted May 7, 2006 Report Share Posted May 7, 2006 These are the factory baseline settings for the 1-2 shift LABELS Transmission Mode Delivered Engine Torque Ft-Lbs {link: GM.TRQENG} Normal Performance 0 0.000000 0.000000 15 0.000000 0.000000 30 0.000000 0.000000 44 0.000000 0.000000 59 4.000000 4.000000 74 6.000000 6.000000 89 9.000000 9.000000 103 12.000000 12.000000 118 15.000000 15.000000 133 19.000000 19.000000 148 23.000000 23.000000 162 27.000000 27.000000 177 30.000000 30.000000 192 34.000000 34.000000 207 39.000000 39.000000 221 46.000000 46.000000 236 53.000000 53.000000 251 57.000000 57.000000 266 61.000000 61.000000 280 66.000000 66.000000 295 71.000000 71.000000 310 75.000000 75.000000 325 78.000000 78.000000 340 81.000000 81.000000 354 84.000000 84.000000 369 87.000000 87.000000 384 90.000000 90.000000 399 90.000000 90.000000 413 90.000000 90.000000 428 90.000000 90.000000 443 90.000000 90.000000 458 90.000000 90.000000 472 90.000000 90.000000 Link to comment Share on other sites More sharing options...
smokum73 Posted May 7, 2006 Author Report Share Posted May 7, 2006 Thanks for the detailed info. I really appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.