Sum 1 Posted June 8, 2006 Report Share Posted June 8, 2006 If you want to run 11.3 you need a new motor, FI/NX, rebuilt tranny, drag slicks, rear end etc etc etc. To beat the Camaro just buy yourslef a 200 wet shot of nitous and start spraying til your eyes roll back and you see your brains melting... along with your motor Link to comment Share on other sites More sharing options...
Blaker888 Posted June 8, 2006 Author Report Share Posted June 8, 2006 So ur saying its not possible! Link to comment Share on other sites More sharing options...
Sum 1 Posted June 8, 2006 Report Share Posted June 8, 2006 So ur saying its not possible! <{POST_SNAPBACK}> Not what I said. Anything's possible for the right price. $15,000.00 will get you into the 11's Link to comment Share on other sites More sharing options...
Quik Posted June 8, 2006 Report Share Posted June 8, 2006 you can go alot faster then 11s forthat price unless that takes into account the price of the truck. Link to comment Share on other sites More sharing options...
RevolutionRaceWorks Posted June 8, 2006 Report Share Posted June 8, 2006 Don't let the high prices eat you up. You can run 11's with your truck.. possibly with the stock short block. I would not spend my money on ls6 heads though save some coin get some darts or afr's get the port work done. Go with a much more aggresive cam with the LSA and duration for a blower cam.. and then start stepping up fron there.. long tubes intake swap.. natrually asperated if you get traction.. I don't think low 12's are a problem with the right parts put together.. then if spray is your weapon of choice hose it at the 6o foot once you are out and running and cush the camaro. But best bet.. decide if you really want to be boosted and if that is the best choice for what you want.. Remember you are running a 5300 lb truck against a 3500 lb car... you have to decide where to put your brains with making power if you want to jump this car. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.