2004Denali Posted October 9, 2006 Report Share Posted October 9, 2006 I will happily contact the company tomorrow and let them know of your interest. I was giving the contact information and want to give them the curtesy of expecting your many inquiries. Heck, maybe we can get a volume discount. As it was, the price was lower than anything else out there. No, the company in question IS NOT NVG. Best, Darius <{POST_SNAPBACK}> Darius, Thanks for looking into this for me, Mark Link to comment Share on other sites More sharing options...
04CHASE Posted October 9, 2006 Report Share Posted October 9, 2006 just another thought, isnt the troque output , that is put on the output shaft multiplied by the gear ratio and torque converter? Link to comment Share on other sites More sharing options...
misterp Posted October 9, 2006 Report Share Posted October 9, 2006 just another thought, isnt the troque output , that is put on the output shaft multiplied by the gear ratio and torque converter?Yes. Link to comment Share on other sites More sharing options...
04CHASE Posted October 9, 2006 Report Share Posted October 9, 2006 ok then say im putting out 600 hp just for an example, what would that equate to on the shaft? Link to comment Share on other sites More sharing options...
2004Denali Posted October 9, 2006 Report Share Posted October 9, 2006 I am probably way wrong with this but the 4L65E has a first gear of 3.052 so I would think 3.052 X 600 would be 1,831.2 but since we are talking torque lets assume that you have 600 ft lbs of torque which would be less than the Transfer case rating of 2300 ft lbs of torque like I said I have know idea if i'm right or way off base Mark Link to comment Share on other sites More sharing options...
SuperSport Posted October 9, 2006 Report Share Posted October 9, 2006 where can you buy the Autotrak II fluid ?? would it come stock in an 04 SSS ?? Link to comment Share on other sites More sharing options...
misterp Posted October 9, 2006 Report Share Posted October 9, 2006 where can you buy the Autotrak II fluid ?? would it come stock in an 04 SSS ??No it's not stock fill for the transfer case; you get it at the GM dealership parts counter; $8-9 per bottle, you need two bottles. Mr. P. Link to comment Share on other sites More sharing options...
CoolBlueSS Posted October 9, 2006 Report Share Posted October 9, 2006 where can you buy the Autotrak II fluid ?? would it come stock in an 04 SSS ??No it's not stock fill for the transfer case; you get it at the GM dealership parts counter; $8-9 per bottle, you need two bottles. Mr. P. <{POST_SNAPBACK}> I did this on my 03, and it's definitely quieter. Link to comment Share on other sites More sharing options...
Darius Posted October 9, 2006 Author Report Share Posted October 9, 2006 Gentlemen, First the disclaimer and then the name of my source to mate a 32 spline output shaft to the input gear of the NVG 149 transfer case. The disclaimer is: I have not purchased from the source and have no knowledge about the quality of their products. Also, I am not an owner in the source's business and receive no compensation from them. They were referred to me by the good folks at "Advanced Adapters." Advanced is a nationally known concern and when they suggested the following company as one which might be able to produce the 32 spline input gear for the NVG 149 case I took their advice. Now the source: Mid West Transmission is the company. Jeff Schonfeld is the person to talk with. Their phone number is: (507) 824-2012. The price that I was quoted was $325.00. True to my word I contacted Jeff this afternoon and confirmed both the price and his willingness to do these custom input gears. That's all I know. Apparently George Blake of Prime Gear thinks I have slammed his product by the comments I made earlier in this thread. Please let me say that I in NO WAY view that product in a negative light. Those good folks have no doubt spent time and money in producing a product they are proud of and I would suggest that for many on this list, the Prime Gear--JS Manufacturing product might be the better approach. I say that because they offer a complete package and not just the input gear for the transfer case. We all have different needs and for MY particular needs (since I do not own a TySy truck or a Silverado) a simple input gear is all I need. My transmission cross-member is custom as is my entire project. I have no stock computer controls with which to interface. They too are custom. As you can see, for me one approach is better but for you the opposite might be true. Best to you all, Darius Link to comment Share on other sites More sharing options...
04CHASE Posted October 9, 2006 Report Share Posted October 9, 2006 who is prime gear? do they offer a complete kit for the 4l80. also since this is the topic what else do we need the inpu shaft new front and rear driveshafts, and what else? Link to comment Share on other sites More sharing options...
misterp Posted October 9, 2006 Report Share Posted October 9, 2006 ...Apparently George Blake of Prime Gear thinks I have slammed his product ...Yeah we get that every so often around here - join the club THANKS for sharing what you have found about Mid West Transmissions. Thank you thank you thank you Mr. P. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.