03CHEV SS Posted December 29, 2006 Report Share Posted December 29, 2006 On the driver side tie-rod on the inner neckle (directly under steering box) I cannot get that thing to take grease. I removed the zerk and grease will go through it. I also took a small wire and checked for obstruction in the knuckle but the grease was Ok and hole was open. So I put old grease zerk back on still wouldn't take grease so put another zerk on and still wont take grease. WTH is going on!! Please help me here. Its the only one that wont grease. I would like to grease. Thanks Quote Link to comment Share on other sites More sharing options...
03CHEV SS Posted January 2, 2007 Author Report Share Posted January 2, 2007 BUMP Anybody have any ideas!!! Quote Link to comment Share on other sites More sharing options...
Bowtie70SS Posted January 2, 2007 Report Share Posted January 2, 2007 I would just put a new zerk in, if it dosen't work then maybe the grease gun isn't fitting well or is defective. Make sure to get it lubed because I had to replace one at 55k. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.