RacerJJ Posted February 21, 2007 Report Share Posted February 21, 2007 I just bought this Comp Cam 236/238 601/605 113 and I need to know a part # for the correct valve spring kit. TIA... Quote Link to comment Share on other sites More sharing options...
04CHASE Posted February 21, 2007 Report Share Posted February 21, 2007 (edited) id get the patriot gold dual springs. good for .650 lift the comp 918's arent good for that much lift. btw thats a big cam for a 6.0 you willl need new push rods too. i couldnt tell you exactly what legnth though. might want to look into some upgrade rockers as well. or send your stockers to harland sharp for some work , they upgrade the bearings so they arent as prone to failure as the stocks. i just got a set of yella terra for like 365. Edited February 21, 2007 by 04CHASE (see edit history) Quote Link to comment Share on other sites More sharing options...
Krambo Posted February 21, 2007 Report Share Posted February 21, 2007 Nice cam! That should rumble nicely I think you have just enough stall for that puppy. I would call comp directly and ask what they suggest. I am sure they have alot of research on it. Quote Link to comment Share on other sites More sharing options...
RacerJJ Posted February 21, 2007 Author Report Share Posted February 21, 2007 Will this kit work??? Summit Racing Quote Link to comment Share on other sites More sharing options...
04CHASE Posted February 22, 2007 Report Share Posted February 22, 2007 i dont think so man, those look like they use the comp 918's. your cam has to much lift for them. look into somethign with a dual spring. the titanium retianers should work and i would recomend them. as for correct pushrods. i would use a legnth checker to get the exactl legnth you need . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.